Sojus07/hackrf
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

Commit Graph

  • 7639ef0e3e W25Q80BV: De-singleton the driver. Jared Boone 2014-11-04 16:49:03 -08:00
  • 4ac2be5304 W25Q80BV: Extract hardware-specific code into separate layer. Jared Boone 2014-11-04 16:33:09 -08:00
  • d55bd529e2 RFFC507x: De-singleton the driver code. Jared Boone 2014-11-04 13:05:07 -08:00
  • 0c69d0a7f7 RFFC5071: Separate hardware-specific code. Jared Boone 2014-11-04 12:35:38 -08:00
  • 453f622b74 MAX2837: De-singleton the driver. Jared Boone 2014-11-04 12:15:03 -08:00
  • 4f3cae2e41 MAX2837: Extract hardware/bus dependent stuff into separate layer. Jared Boone 2014-11-04 11:16:14 -08:00
  • 3bc41f1480 Si5351C: Un-singleton the high- and low-level drivers. Proper. Jared Boone 2014-11-04 10:45:24 -08:00
  • 0bf84d974e Si5351C: Extract low-level driver code. Jared Boone 2014-11-04 09:58:31 -08:00
  • 7e81647f0d Merge pull request #150 from jboone/hotfix_compiler_warnings_20141110 Michael Ossmann 2014-11-10 16:53:14 -07:00
  • 256d6ccef0 Re-scope buffer[] to solve unread array warning. Jared Boone 2014-11-10 11:19:50 -08:00
  • e3a841ca24 XSVF: Fix apparent #ifdef scope bug in xsvfDoXCOMMENT() where comments aren't truly ignored. Jared Boone 2014-11-10 11:16:39 -08:00
  • 75d194e48b Quiet warning about unused arg in xsvfInfoCleanup(). Jared Boone 2014-11-10 11:15:01 -08:00
  • 9bf640895f Quiet warning about unused args in cpld_buffer_refilled(). Jared Boone 2014-11-10 11:11:49 -08:00
  • 572fe32393 Add #include to address "sgpio_cpld_stream_rx_set_q_invert" warning. Jared Boone 2014-11-10 11:10:18 -08:00
  • 6935ad625f Merge pull request #140 from cottsay/lib-suffix-fix Michael Ossmann 2014-11-04 23:37:38 -07:00
  • ecab042a3f Merge pull request #141 from cottsay/udev-install-dir Michael Ossmann 2014-11-04 23:37:03 -07:00
  • f4d7102115 Merge pull request #149 from jboone/hotfix_rffc5071_dirty_read Michael Ossmann 2014-11-04 23:36:15 -07:00
  • 018db52f11 Merge pull request #148 from jboone/hotfix_max2837_dirty_read Michael Ossmann 2014-11-04 23:35:57 -07:00
  • dcffe7173f Revert "Merge pull request #132 from bgamari/update-libopencm3" Michael Ossmann 2014-11-04 23:25:55 -07:00
  • cbe69b3d0b Merge pull request #132 from bgamari/update-libopencm3 Michael Ossmann 2014-11-04 18:02:39 -07:00
  • 2f2ca2e630 Merge branch 'jboone-firmware_cmake' Michael Ossmann 2014-11-04 17:54:04 -07:00
  • dbf43bb06b resolved conflicts and merged jboone:firmware_cmake Michael Ossmann 2014-11-04 17:53:42 -07:00
  • c5d52b6537 RFFC5071: Fix to read value from device when register marked dirty. Jared Boone 2014-11-04 12:48:42 -08:00
  • c623e20fae MAX2837: Fix register read when dirty Jared Boone 2014-11-04 11:36:53 -08:00
  • bb9df8a12a Merge pull request #137 from xyb/py Michael Ossmann 2014-09-25 22:35:53 -06:00
  • ea47fd4fbf add CMake value to change udev rule destination Scott K Logan 2014-09-21 12:26:08 -05:00
  • c7116b4081 fixed lib suffixes in pkgconfig Scott K Logan 2014-09-21 12:22:57 -05:00
  • 2edd8faac3 try to find Jawbreaker and HackRF One xyb 2014-09-06 22:54:54 +08:00
  • 69c4997727 fixed bug #130, CLKIN failure Michael Ossmann 2014-08-28 11:34:30 -06:00
  • 21ecd70099 incremented udev rule file number to avoid conflicts Michael Ossmann 2014-08-28 09:29:03 -06:00
  • ac16a093fc Update libopencm3 Ben Gamari 2014-06-26 18:05:10 -04:00
  • 635d429a9a DFU instructions update Michael Ossmann 2014-08-21 22:15:32 -06:00
  • 109d11558e fixed compiler warning Michael Ossmann 2014-08-21 22:05:20 -06:00
  • a3dbde7a81 moved udev rules from hackrf-tools to libhackrf Michael Ossmann 2014-08-21 22:01:26 -06:00
  • bac53c035e Merge pull request #128 from sophsec/master Michael Ossmann 2014-08-21 20:43:41 -06:00
  • dcc070c31f Merge pull request #126 from jboone/cpld_tx_q_invert_fix Michael Ossmann 2014-08-21 12:11:24 -06:00
  • 2ee29a9e71 Fixed setting of partid in hackrf_board_partid_serialno_read Postmodern 2014-08-20 15:29:16 -07:00
  • a380713fdd CPLD: Separate RX and TX invert, fix TX invert sense. Jared Boone 2014-08-20 08:21:06 -07:00
  • b2f92665ea CPLD: Fix whitespace. Jared Boone 2014-08-20 08:04:09 -07:00
  • aec97e7470 Merge pull request #125 from jboone/cpld_tx_q_invert Michael Ossmann 2014-08-20 00:43:55 -06:00
  • ad403fb370 CPLD: Add TX Q invert mechanism. Jared Boone 2014-08-16 17:15:13 -07:00
  • 741941f838 s/Jawbreaker/HackRF/ Michael Ossmann 2014-08-15 12:31:25 -06:00
  • c8742572db high-side injection for tuning below 2150 MHz (known bug: baseband spectrum is inverted on TX) Michael Ossmann 2014-08-15 07:49:13 -06:00
  • 31c82a879a cleaned up signal source mode Michael Ossmann 2014-08-11 22:58:11 -06:00
  • 19bb8bfb5f Merge pull request #121 from jboone/cleanup_201408 Michael Ossmann 2014-08-11 21:34:51 -06:00
  • 6f2e570829 Merge pull request #119 from jboone/cpld_q_invert Michael Ossmann 2014-08-11 21:32:31 -06:00
  • 19ec8b897a Merge pull request #118 from dovecho/master Michael Ossmann 2014-08-11 21:27:44 -06:00
  • cd5f0bbb91 Qualify "program" firmware make target to eliminate multiple-definition errors when making entire set of firmware. Jared Boone 2014-06-15 15:30:18 -07:00
  • 9e95d235b4 Create separate CMake toolchain file. Add references to toolchain file in each firmware CMakeLists.txt. I suspect this can be simpler still, just not sure how, yet... Jared Boone 2014-06-15 15:26:20 -07:00
  • 4ca1db25a4 Reinstate V=1 make option to see what sections were removed during linking. Jared Boone 2014-06-15 15:24:14 -07:00
  • c60caa32fa Ignore firmware/**/build directories for CMake. Jared Boone 2014-06-15 12:37:03 -07:00
  • 2a7ed069c7 Firmware build system is now CMake, and seems much more sane on the whole. Jared Boone 2014-06-15 12:22:19 -07:00
  • 245aa1f11e Do not configure BOOT[3:0] pins in SCU, as they should be idle/input/hi-Z on HackRF. Jared Boone 2014-06-15 12:36:42 -07:00
  • 16709505fc USB0 and USB1 LEDs are only on Jellybean and Jawbreaker. Jared Boone 2014-06-15 12:35:59 -07:00
  • 54ef8c19cf Add HackRF One RF power enable for samples that RX or TX. Jared Boone 2014-06-15 12:00:32 -07:00
  • 2538785165 Replace GPIO control of 1V8 supply with official function enable_1v8_power(). Jared Boone 2014-06-15 11:57:42 -07:00
  • fe9b4b8ca8 Remove RF power enable from blinky -- it's not necessary. Jared Boone 2014-06-15 11:56:17 -07:00
  • 2abdebfb2a Add parentheses to silence ambiguous expression warning. Jared Boone 2014-06-15 10:17:49 -07:00
  • 739dc1acd9 Add GCC "used" attribute to prevent hard_fault_handler_c() from being removed. It trips up -flto. Jared Boone 2014-06-15 10:13:25 -07:00
  • 9b435f3b7e Configure APB3 for appropriate clock sources during start-up. Jared Boone 2014-06-15 10:10:53 -07:00
  • 8e387e5489 CPLD: Update bitstream files with RX Q channel flip. Jared Boone 2014-08-11 11:57:59 -07:00
  • 422173a5f7 SGPIO: Add CPLD RX Q channel inversion, API to control. Jared Boone 2014-08-04 14:20:42 -07:00
  • 0ab6a92ae6 Change SGPIO CPLD decimation API interface to be one-based (decimation of 1 to 8). Jared Boone 2014-06-15 10:12:43 -07:00
  • 7bdc499301 Minor changes to tx_callback dovecho 2014-07-06 00:34:40 +08:00
  • 8e5de3b4a8 Add signal source mode to hackrf_transfer dovecho 2014-07-06 00:10:07 +08:00
  • 44df9d1f82 si5351c_activate_best_clock_source() when starting RX or TX Michael Ossmann 2014-07-01 15:18:56 -06:00
  • f9c90f0d35 commented si5351c_activate_best_clock_source() trying to solve intermittent USB failures Michael Ossmann 2014-07-01 14:48:02 -06:00
  • 576e25b1d4 updated date on silk screen Michael Ossmann 2014-05-19 13:15:18 -06:00
  • 43f96036e4 increased SKY13317 pad size Michael Ossmann 2014-05-19 13:13:57 -06:00
  • 2e6a4762ef committed missing gerber files Michael Ossmann 2014-04-24 11:27:13 -06:00
  • 6bc917ae26 cpld/README Michael Ossmann 2014-04-24 10:42:25 -06:00
  • 2eaf0c40d9 firmware build instructions with BOARD= Michael Ossmann 2014-04-24 10:33:21 -06:00
  • be88d2332d made mounting holes explicitly DNP Michael Ossmann 2014-04-13 17:32:07 -06:00
  • 423cd0ff96 minor trace width fix Michael Ossmann 2014-04-13 17:15:29 -06:00
  • b7e5dca105 changed shape of hole to include P3 Michael Ossmann 2014-04-02 18:06:55 -06:00
  • ed1f74f8ed tightend up edge cut-out for buttons Michael Ossmann 2014-04-02 17:58:26 -06:00
  • 14e631577e nudged edges 0.4 mm where plastic was overly thin Michael Ossmann 2014-04-02 17:48:20 -06:00
  • d581d97075 changed corner holes from 3 mm to 3.2 mm Michael Ossmann 2014-04-02 17:47:11 -06:00
  • 815d1f640d readability suggestion from the likely less sleep deprived Michael Ossmann 2014-03-16 10:57:15 -06:00
  • f61e9d2bd7 write unsigned chars to .wav file instead of signed chars Michael Ossmann 2014-03-16 10:31:17 -06:00
  • a50ecd7128 removed old cpldjtagprog. use hackrf_cpldjtag with hackrf_usb firmware. Michael Ossmann 2014-03-16 09:38:14 -06:00
  • 861476d6c5 Merge branch 'master' of github.com:bvernoux/hackrf into bvernoux-master Michael Ossmann 2014-03-16 09:13:30 -06:00
  • 453998d7b6 HackRF One documentation update Michael Ossmann 2014-03-16 09:12:59 -06:00
  • 88becad449 hackrf_transfer: * Fixed printf() with u64 problems/warnings. * Fixed Wav header option -w and also tested with file >4GB (on Win8.1). bvernoux 2014-03-16 14:48:41 +01:00
  • 860ffda639 Update README.md Benjamin Vernoux 2014-03-16 13:18:48 +01:00
  • 7443cd1d5b Update README.md Benjamin Vernoux 2014-03-16 13:17:21 +01:00
  • 19110e6e06 Update README.md Benjamin Vernoux 2014-03-16 13:16:40 +01:00
  • 9191afe2e1 Create Readme for Host Benjamin Vernoux 2014-03-16 13:15:04 +01:00
  • 32d88e0382 HackRF One case (Sketchup/Svg) bvernoux 2014-03-16 13:03:38 +01:00
  • 15bda174c7 maintain PLLA on XTAL and PLLB on CLKIN at all times (makes automatic clock source switching more reliable) Michael Ossmann 2014-03-14 22:27:30 -06:00
  • ca04d7c04b activated CLKOUT (always on) and CLKIN (automatically used when detected) Michael Ossmann 2014-03-14 21:28:13 -06:00
  • 0fab3157c3 improved hackrf_transfer help for gain options and changed the letter for a couple switches Michael Ossmann 2014-03-14 10:45:53 -06:00
  • d4a5c2290b replaced set_freq_if() with set_freq_explicit() and implemented explicit tuning option in hackrf_transfer Michael Ossmann 2014-03-13 16:06:51 -06:00
  • 08927ab50b fixed submodule instructions (no cmake for libopencm3) Michael Ossmann 2014-03-13 08:44:28 -06:00
  • 7c3f6340ed HackRF One antenna port power control in firmware, libhackrf, and hackrf_transfer Michael Ossmann 2014-03-12 17:21:49 -06:00
  • 716d140dfb libhackrf support for HackRF One USB ID and board ID Michael Ossmann 2014-03-12 16:29:07 -06:00
  • dce15fa9f6 firmware support for HackRF One USB ID Michael Ossmann 2014-03-12 16:21:20 -06:00
  • 630a78aabe stale comment Michael Ossmann 2014-03-12 16:05:53 -06:00
  • f5be40fe5b fixed tuning bug Michael Ossmann 2014-03-12 12:40:45 -06:00
  • 028e9d6204 updated udev rules for HackRF One and NXP DFU Michael Ossmann 2014-03-11 16:27:05 -06:00