TitanMKD
2612b8910f
Added readme to build host tools for Cygwin/Mingw & Linux.
2013-02-10 18:53:50 +01:00
TitanMKD
013f1ea4f6
Modified firmware and host tools for portability Linux/Mingw, added fw rffc5071 & host hackrf_rffc5071 example.
2013-02-10 18:51:54 +01:00
TitanMKD
13a6b9086e
Fixed some makefile and set default BOARD to JAWBREAKER (instead of JELLYBEAN).
2013-02-10 18:33:01 +01:00
TitanMKD
e7e4a55af3
SoBv1-DP17298-jawbreaker photo without PCB
2013-01-12 11:57:40 +01:00
TitanMKD
632214a6ac
Added LPC4330 SGPIO Output frequencies (signal generator mode) measurements on 16 SGPIO with frequency from 102MHz to 6.375MHz.
2012-11-27 20:32:26 +01:00
TitanMKD
d46a59fba3
Fix for LPC4330 MCU frequency to be set to 204MHz instead of 102MHz.
2012-11-26 23:41:13 +01:00
Michael Ossmann
b0086de494
updated gerbers and moved to doc directory
2012-11-11 11:44:44 -07:00
Michael Ossmann
3158c83a25
Jawbreaker SoB case README
2012-11-11 09:44:41 -07:00
Michael Ossmann
3361114f40
Merge pull request #26 from TitanMKD/master
...
Fix problem with ".data" section with .bin
2012-11-11 08:39:34 -08:00
TitanMKD
499917759d
Updated Gerber HackRF Jawbreaker 6 November 2012
2012-11-10 09:19:24 +01:00
TitanMKD
a453d161ab
Fix problem with ".data" section which was not included, now it include all loadable section defined in elf.
2012-11-10 00:36:58 +01:00
TitanMKD
b8ede43963
Fix problem with .bin generated without .data section (only .text) !!
2012-11-09 22:18:25 +01:00
TitanMKD
c393bd994a
Merge branch 'master' of git://github.com/mossmann/hackrf
2012-11-07 20:31:33 +01:00
Michael Ossmann
bc950640ed
jawbreaker documentation (schematic, assembly diagram, bom)
2012-11-06 19:38:13 -07:00
Michael Ossmann
5b34714995
visibility fixes for assembly diagram
2012-11-06 19:33:43 -07:00
Michael Ossmann
4de33d7c76
renamed boot pins to agree with data sheet
2012-11-06 14:06:09 -07:00
Michael Ossmann
98e0c7bb27
some schematic notes
2012-11-06 13:58:37 -07:00
TitanMKD
8920e94353
Merge branch 'master' of git://github.com/mossmann/hackrf
2012-11-05 19:59:43 +01:00
Michael Ossmann
c2181d79fa
Merge branch 'master' of github.com:mossmann/hackrf
2012-11-05 08:45:59 -07:00
Michael Ossmann
190d8fb8e7
Makefile fixes for bad max2837_set_lpf_bandwidth references
2012-11-05 08:43:07 -07:00
Michael Ossmann
2bd20b768e
switched back to SPIFI boot by default
2012-11-04 15:29:57 -07:00
TitanMKD
638e70d7d6
Merge branch 'master' of git://github.com/mossmann/hackrf
2012-11-04 12:16:42 +01:00
Michael Ossmann
edd6846da6
Merge pull request #25 from jboone/master
...
Fix for TX DAC sample vs. clock skew.
2012-11-02 22:44:55 -07:00
Jared Boone
cc5f1c61c7
Fix clock edge for TX mode. TX data was completely crapped up due to skew on my Jellybean/Lemondrop board. Hopefully, this also applies to Jawbreaker. I'll recheck once I have hardware in-hand.
2012-11-02 22:34:43 -07:00
Jared Boone
f60383c161
Merge branch 'master' of https://github.com/mossmann/hackrf
2012-11-01 23:16:19 -07:00
Jared Boone
413b34eb86
Add #includes required for Linux.
2012-11-01 22:48:45 -07:00
Michael Ossmann
92474c4228
Merge pull request #24 from jboone/master
...
Initial libhackrf release.
2012-11-01 15:53:53 -07:00
Jared Boone
526a8e9e7a
Add typed request return value that indicates request is OK or requires endpoint STALL.
...
Changed vendor request to a lookup table, instead of an ever-growing switch statement.
2012-10-18 19:47:25 -07:00
Jared Boone
e8b30f3489
Oops. Request handlers called from setup handler could access the IN side of the endpoint, which does not get a copy of the SETUP bytes.
...
TODO: Make a single copy of the SETUP bytes, and provide a clean way to access those bytes regardless of whether you're holding the IN or OUT endpoint. (This was a problem in the IN complete handler, and probably other places, too.)
2012-10-18 19:42:36 -07:00
TitanMKD
5616b1be42
Merge branch 'master' of git://github.com/jboone/hackrf
2012-10-18 19:30:10 +02:00
TitanMKD
a8c3aa0cf5
Merge branch 'master' of git://github.com/mossmann/hackrf
2012-10-18 19:29:19 +02:00
Jared Boone
fc9632f19d
Add code to control MAX2837 B1 through B7 from Jellybean. Another feeble attempt to control DC bias.
2012-10-17 22:28:10 -07:00
Jared Boone
143d845b05
Add code to control RXHP pin on MAX2837 (Jellybean only). I was hoping this would control the baseband DC offset problem, but no, it doesn't seem to help at all.
2012-10-17 21:48:41 -07:00
Jared Boone
2d79f6d69f
Added support for hackrf_max2837 utility to accept registers and values as "0x" (base-16) or "0b" (base-2).
2012-10-17 20:55:48 -07:00
Jared Boone
2a58528782
Made explicit a few libhackrf result tests -- comparing against HACKRF_SUCCESS instead of checking for non-zero.
2012-10-17 17:02:44 -07:00
Jared Boone
93c1175362
Add a quick, dirty, and marginally-useful text configuration option to hackrf_si5351c example.
2012-10-17 17:01:56 -07:00
Jared Boone
549c943979
Add USB control of LPF baseband filter.
...
Add max2837_set_lpf_bandwidth() function to choose available LPF filter bandwidth based on bandwidth in Hz.
Change configuration of MAX2837 to set LPF_EN and FT at max2837_setup(), not in max2837_rx() or max2837_tx() (which was overriding prior filter configuration).
2012-10-17 17:00:36 -07:00
Jared Boone
9c4a0e94b0
Factor out sample_rate_set() from cpu_clock_init().
...
Implement switching between several supported sampling rates for Jellybean and Jawbreaker.
Commit bits of the Si5351C USB request support that I apparently missed in a prior commit.
2012-10-17 16:57:26 -07:00
Jared Boone
d4da08a3d7
Oops! Forgot to change MAX2837 mode from RX to TX when transceiver mode is changed.
...
Initialize MAX5864 earlier, in "transceiver" mode (where both ADC and DAC are active), and then shift SSP1 into MAX2837 mode and leave it there, for faster tuning and RX/TX switching.
2012-10-17 15:59:47 -07:00
Jared Boone
6babcbe579
Add USB vendor requests to read/write Si5351C registers.
2012-10-17 11:57:44 -07:00
Jared Boone
7fdfde9314
Make use of i2c0_init() argument to control duty cycle, when APB1 clock shifts from IRC (~12MHz) to PLL1 (204MHz).
2012-10-17 11:48:35 -07:00
Jared Boone
63b1a25979
Consolidate a few clock setup tasks that repeat among many projects into cpu_clock_init().
2012-10-17 11:45:30 -07:00
Jared Boone
34b4729cfe
Whacked the usb_test project, which was transformed into libhackrf.
...
Moved the Python utilities (such as they are) into a host/python directory.
2012-10-16 20:46:41 -07:00
Jared Boone
0ad2ad3c9a
Merge branch 'master' of https://github.com/mossmann/hackrf
2012-10-16 20:33:50 -07:00
Jared Boone
91a9bf5ca3
Initial commit of libhackrf.
2012-10-16 20:33:41 -07:00
Michael Ossmann
27b4bab680
updated PCB specs to match sunstone
2012-10-16 20:00:23 -06:00
Michael Ossmann
0e420db0c8
plot options, zone updates
2012-10-16 18:05:17 -06:00
Jared Boone
38b6382c5a
Add a guard for stream data file read/write, to ensure fd is valid.
2012-10-16 16:58:36 -07:00
Jared Boone
6cd8da6930
Return of the hand-optimized assembly for SGPIO read and write interrupt.
...
Reset only the one SGPIO slice flag that is actually causing the interrupt.
2012-10-16 16:57:35 -07:00
Jared Boone
1391bfc61e
Flip endian-ness on USB MAX2837 register read request.
2012-10-16 16:56:25 -07:00
