hackrf

xapp058

xapp058/ports: Clean up comments and dead code

2013-09-14 18:24:25 -04:00

bitband.c

Fix-ups to copyrights -- missing e-mail address and inconsistent formatting.

2012-10-06 19:14:55 -07:00

bitband.h

Fix-ups to copyrights -- missing e-mail address and inconsistent formatting.

2012-10-06 19:14:55 -07:00

cpld_jtag.c

cpld: Stream CPLD data from host

2013-09-14 18:24:25 -04:00

cpld_jtag.h

cpld: Stream CPLD data from host

2013-09-14 18:24:25 -04:00

fault_handler.c

Add GCC "used" attribute to prevent hard_fault_handler_c() from being removed. It trips up -flto.

2014-08-11 16:07:59 -07:00

fault_handler.h

Added fault handler header file, where I've defined the Cortex-M3/M4 SCB using a struct instead of a slew of #defines. This deviates from the libopencm3 method, but is superior in other ways. So, there you go. It's not in libopencm3, it's here.

2012-10-10 13:36:10 -07:00

gpdma.c

Add GPDMA LLI functions to create a loop or one-shot chain of LLIs.

2013-12-08 18:18:22 -08:00

gpdma.h

Add GPDMA LLI functions to create a loop or one-shot chain of LLIs.

2013-12-08 18:18:22 -08:00

hackrf_core.c

Do not configure BOOT[3:0] pins in SCU, as they should be idle/input/hi-Z on HackRF.

2014-08-11 16:09:50 -07:00

hackrf_core.h

USB0 and USB1 LEDs are only on Jellybean and Jawbreaker.

2014-08-11 16:09:37 -07:00

LPC43xx_M0_memory.ld

Break ldscripts into smaller pieces that can be shared.

2014-01-11 17:38:27 -08:00

LPC43xx_M4_M0_image_from_text.ld

Rename ldscript to be the one and only M0 embedding .ld, reading from .text.

2014-02-18 16:48:21 -08:00

LPC43xx_M4_memory.ld

Break ldscripts into smaller pieces that can be shared.

2014-01-11 17:38:27 -08:00

LPC4320_M4_memory.ld

Break ldscripts into smaller pieces that can be shared.

2014-01-11 17:38:27 -08:00

LPC4330_M4_memory.ld

Break ldscripts into smaller pieces that can be shared.

2014-01-11 17:38:27 -08:00

m0_bin.s.cmake

Firmware build system is now CMake, and seems much more sane on the whole.

2014-08-11 16:37:14 -07:00

m0_sleep.c

Add default M0 code that just loops forever, if a project doesn't specify any SRC_M0_[CS] files.

2013-11-20 15:11:54 -08:00

max2837_regs.def

firmware: gain control

2013-05-27 14:01:22 +02:00

max2837.c

MAX2837: Fix register read when dirty

2014-11-04 11:36:53 -08:00

max2837.h

Add MAX2837 mode set/get functions.

2013-09-06 22:29:57 -07:00

max5864.c

Use new ssp_transfer() function instead of ssp_write().

2012-10-13 16:58:22 -07:00

max5864.h

Fix-ups to copyrights -- missing e-mail address and inconsistent formatting.

2012-10-06 19:14:55 -07:00

README

started firmware directory with some basic stuff

2012-05-21 11:33:46 -06:00

rf_path.c

HackRF One antenna port power control in firmware, libhackrf, and hackrf_transfer

2014-03-12 17:21:49 -06:00

rf_path.h

replaced set_freq_if() with set_freq_explicit() and implemented explicit tuning option in hackrf_transfer

2014-03-13 16:06:51 -06:00

rffc5071_regs.def

Fix overflows in shifts, suppress warnings for temporarily unused variables.

2012-09-04 20:08:30 -04:00

rffc5071.c

RFFC5071: Fix to read value from device when register marked dirty.

2014-11-04 12:48:42 -08:00

rffc5071.h

Widen frequency argument/return paths in RFFC5071 code.

2014-02-19 12:56:24 -08:00

rom_iap.c

Cleanup on xxx_rom_to_ram directory now it contains only makefile, removed redundant .c file from xxx dir.

2013-04-07 18:55:12 +02:00

rom_iap.h

Add host(hackrf_info)/fw(usb_performance) IAP read part id/serial no(to be confirmed).

2013-03-09 11:47:28 +01:00

sgpio_dma.c

Add GPDMA LLI functions to create a loop or one-shot chain of LLIs.

2013-12-08 18:18:22 -08:00

sgpio_dma.h

Expose SGPIO DMA LLI configuration function.

2013-12-08 13:14:26 -08:00

sgpio.c

SGPIO: Add CPLD RX Q channel inversion, API to control.

2014-08-11 13:02:02 -07:00

sgpio.h

SGPIO: Add CPLD RX Q channel inversion, API to control.

2014-08-11 13:02:02 -07:00

si5351c.c

fixed bug #130 , CLKIN failure

2014-08-28 11:34:30 -06:00

si5351c.h

maintain PLLA on XTAL and PLLB on CLKIN at all times (makes automatic clock source switching more reliable)

2014-03-14 22:27:30 -06:00

streaming.c

Factor out USB API for transceiver control into separate files.

2013-09-20 12:54:56 -07:00

streaming.h

Factor out USB API for transceiver control into separate files.

2013-09-20 12:54:56 -07:00

tuning.c

high-side injection for tuning below 2150 MHz (known bug: baseband spectrum is inverted on TX)

2014-08-15 07:49:13 -06:00

tuning.h

replaced set_freq_if() with set_freq_explicit() and implemented explicit tuning option in hackrf_transfer

2014-03-13 16:06:51 -06:00

usb_queue.c

Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.

2013-09-17 15:10:46 -07:00

usb_queue.h

Broke some application-specific USB code into separate files within hackrf_usb/. Hoping I can use them as necessary in other projects, or push them into a library eventually.

2013-09-19 19:51:32 -07:00

usb_request.c

Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.

2013-09-17 15:10:46 -07:00

usb_request.h

Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.

2013-09-17 15:10:46 -07:00

usb_standard_request.c

Remove dependencies on application-specific USB descriptors.

2013-09-17 15:13:12 -07:00

usb_standard_request.h

Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.

2013-09-17 15:10:46 -07:00

usb_type.h

Remove dependencies on application-specific USB descriptors.

2013-09-17 15:13:12 -07:00

usb.c

Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.

2013-09-17 15:10:46 -07:00

usb.h

Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.

2013-09-17 15:10:46 -07:00

w25q80bv.c

Cleanup on xxx_rom_to_ram directory now it contains only makefile, removed redundant .c file from xxx dir.

2013-04-07 18:55:12 +02:00

w25q80bv.h

Cleanup on xxx_rom_to_ram directory now it contains only makefile, removed redundant .c file from xxx dir.

2013-04-07 18:55:12 +02:00