Sojus07/hackrf
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
hackrf/firmware/hackrf_usb
History
Martin Ling a5e1521535 Don't update buffer pointer until after checking for shortfall. 
The buffer pointer is not needed in the shortfall paths. Moving this
update after the shortfall checks saves 3 cycles in each shortfall path.
2022-02-13 16:46:12 +00:00
..
CMakeLists.txt
Add USB vendor request to read M0 state, and host support for doing so.
2022-02-13 16:46:12 +00:00
hackrf_usb.c
Add USB requests and host support to set TX/RX shortfall limits.
2022-02-13 16:46:12 +00:00
m0_state.c
Add USB vendor request to read M0 state, and host support for doing so.
2022-02-13 16:46:12 +00:00
m0_state.h
Add an M0 TX_START mode, in which zeroes are sent until data is ready.
2022-02-13 16:46:12 +00:00
sgpio_m0.s
Don't update buffer pointer until after checking for shortfall.
2022-02-13 16:46:12 +00:00
usb_api_board_info.c
Add software controlled reset
2017-01-27 15:03:53 -07:00
usb_api_board_info.h
Add software controlled reset
2017-01-27 15:03:53 -07:00
usb_api_cpld.c
firmware: clean up transceiver modes
2020-02-11 16:59:59 +00:00
usb_api_cpld.h
firmware: clean up transceiver modes
2020-02-11 16:59:59 +00:00
usb_api_operacake.c
clear frequency ranges before adding new ones
2021-12-12 13:25:44 -07:00
usb_api_operacake.h
operacake: add API function to set port dwell times
2021-10-14 14:41:52 +01:00
usb_api_register.c
hackrf_clock: Allow CLKOUT to be enabled / disabled
2017-11-07 11:23:48 -07:00
usb_api_register.h
hackrf_clock: Allow CLKOUT to be enabled / disabled
2017-11-07 11:23:48 -07:00
usb_api_spiflash.c
SPI Flash: add function to clear SPI flash status register
2017-11-06 10:42:19 -07:00
usb_api_spiflash.h
SPI Flash: add function to clear SPI flash status register
2017-11-06 10:42:19 -07:00
usb_api_sweep.c
Add a second counter to keep track of bytes transferred by the M4.
2022-02-13 16:46:12 +00:00
usb_api_sweep.h
Increment a sequence number when transceiver mode changes.
2022-02-03 07:36:34 +00:00
usb_api_transceiver.c
Don't send 16K of zeroes to the M0 at TX startup.
2022-02-13 16:46:12 +00:00
usb_api_transceiver.h
Add USB requests and host support to set TX/RX shortfall limits.
2022-02-13 16:46:12 +00:00
usb_api_ui.c
Add option to disable HackRF UI
2020-01-22 21:23:30 +00:00
usb_api_ui.h
Add option to disable HackRF UI
2020-01-22 21:23:30 +00:00
usb_bulk_buffer.h
Add defines for USB bulk buffer size & mask.
2022-02-13 16:46:12 +00:00
usb_descriptor.c
Add USB vendor request to read M0 state, and host support for doing so.
2022-02-13 16:46:12 +00:00
usb_descriptor.h
Add Windows Compatible ID descriptors
2016-07-17 22:20:32 +01:00
usb_device.c
Add Windows Compatible ID descriptors
2016-07-17 22:20:32 +01:00
usb_device.h
Broke some application-specific USB code into separate files within hackrf_usb/. Hoping I can use them as necessary in other projects, or push them into a library eventually.
2013-09-19 19:51:32 -07:00
usb_endpoint.c
Change USB bulk endpoint for baseband data to have only one queue item. Since there are only two baseband buffers, and one is transferring with the codec and the other with USB, enqueueing more than one buffer at a time would result in transferring an incomplete buffer.
2013-12-31 20:34:01 -08:00
usb_endpoint.h
Broke some application-specific USB code into separate files within hackrf_usb/. Hoping I can use them as necessary in other projects, or push them into a library eventually.
2013-09-19 19:51:32 -07:00