Sojus07/hackrf
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
1,591 Commits 1 Branch 0 Tags
Commit Graph

643 Commits

Author SHA1 Message Date
Jared Boone
042229ea19 Set transceiver mode to OFF whenever USB configuration changes. 2013-09-08 15:52:36 -07:00
Jared Boone
0411ffe3f0 Set RF path direction to "off" when transceiver_mode is OFF. 2013-09-08 15:44:37 -07:00
Jared Boone
98e33fbb5b Remove commented RFFC5071 code in set_transceiver_mode. 2013-09-08 15:36:25 -07:00
Jared Boone
d00123ed24 Update RFFC5071 enable state when switching RF path direction. TODO: There's some stuff here that needs refactoring -- duplicate code is showing up. 2013-09-08 15:20:47 -07:00
Jared Boone
a897c4f016 Add RF_PATH_DIRECTION_OFF enum and code. 2013-09-08 15:19:27 -07:00
Jared Boone
217630d82c Convert rf_path_set_direction from if/else to switch/case. 2013-09-08 15:13:44 -07:00
Jared Boone
9b2b7b0817 Move SGPIO ISRs to separate .c/.h files. 
Move usb_bulk_buffer* to separate .c/.h files.
 2013-09-08 15:10:19 -07:00
Jared Boone
1c81fa895c Bump mossmann/libopencm3 commit. 2013-09-07 22:34:36 -07:00
Jared Boone
ddf4c01f66 Forgot to propagate license to rf_path.[ch]. 2013-09-07 22:30:48 -07:00
Jared Boone
14eba3d947 Extract tuning code into separate .c/.h file. 2013-09-07 22:30:13 -07:00
Jared Boone
b5dc264d22 Extract rf_path code into a separate .c/.h. 
Add an rf_path_init() function to do initial, idle configuration during start-up.
 2013-09-07 22:22:03 -07:00
Jared Boone
7cf4058372 Move various switchctrl manipulation into clearly-defined rf_path_*() implementations. 2013-09-07 22:06:01 -07:00
Jared Boone
bf297e0e08 I might've been a bit hasty removing volatile from transceiver_mode. 2013-09-07 22:01:46 -07:00
Jared Boone
4ad3680428 Break SGPIO interrupt handlers in two -- RX and TX. 
Assign an SGPIO interrupt handler function at runtime, based on RX or TX mode. NOTE: This is incompatible with placing the vector table in ROM, which is fine on a device with no internal flash).
Remove SGPIO interrupt-time dependency on volatile transceiver_mode variable. Side effect is that a few cycles are probably saved inside the SGPIO interrupt.
 2013-09-07 21:04:36 -07:00
Jared Boone
e7c6408473 Add comment describing SWITCHCTRL pins vs. RF path configurations. 2013-09-07 20:21:43 -07:00
Jared Boone
d65314db37 Clean up switchctrl code a bit -- redundant #ifdefs and complex if conditions. 2013-09-07 20:20:48 -07:00
Jared Boone
bafe97e302 Extract knowledge of RF path configurations from the RFFC5071 driver. 
Change initial RF path mode to SWITCHCTRL_SAFE. (Previously started at SWITCHCTRL_SAFE and then immediately switched to SWITCHCTRL_AMP_BYPASS.)
 2013-09-07 12:59:57 -07:00
Jared Boone
6dee455ef2 Contain calls to rffc5071_(rx|tr) to a single location. 2013-09-07 12:40:09 -07:00
Jared Boone
518c46a111 Oops, missed a spot where I should've called a MAX2837 mode function. 2013-09-06 23:09:29 -07:00
Jared Boone
b89f43e97e Replace transceiver_mode dependent MAX2837 mode management with max2837_mode() -> max2837_set_mode() calls. 2013-09-06 22:50:04 -07:00
Jared Boone
a367f84d15 Add MAX2837 mode set/get functions. 2013-09-06 22:29:57 -07:00
Jared Boone
a5c0b5deeb Add MAX2837 functions to control operating mode. 
Replace direct manipulation of GPIOs controlling MAX2837 with operating mode functions.
 2013-09-06 21:29:31 -07:00
Jared Boone
7c5db57f02 Hide the MAX2837 intermediate frequency behind a function. It also prevents leakage of the freq_*_cache variables. 2013-09-06 16:46:03 -07:00
Jared Boone
1ac3d59875 Update libopencm3 submodule commit. 2013-09-06 16:02:01 -07:00
Jared Boone
5143456d6d Update libopencm3 submodule commit. 2013-09-06 15:25:34 -07:00
Jared Boone
b893b0a694 Merge remote-tracking branch 'bgamari/usb' into bgamari_usb_merge 
Conflicts:
	firmware/hackrf_usb/hackrf_usb.c
	firmware/libopencm3
 2013-09-06 15:20:58 -07:00
Jared Boone
266003f3af Added two CGU debugging tools: 
- check_clock.py to decode the frequency monitor result.
- dump_cgu.py to display selected CGU registers in a legible format.
 2013-09-04 16:34:20 -07:00
Jared Boone
6c0d803647 Cleaned up management of SGPIO and transceiver mode state vs. USB configuration state. This should help with power management. It may also be necessary when operating at low speed (48MHz), to keep the SGPIO interrupts from chewing up ALL available CPU cycles. 2013-09-04 16:27:43 -07:00
Jared Boone
1f5b979fd9 Added usb_set_configuration_changed_cb() call that bgamari fixed in his as-yet-unmerged USB branch. 2013-09-04 16:24:19 -07:00
Jared Boone
d76d72665e Adjusted cpu_clock_pll1_low_speed() to operate at 48MHz, as per several comments with the code. The actual MSEL value was previously selecting 84MHz. 2013-09-04 16:23:32 -07:00
Jared Boone
237bf6ecdb Pulled redundant PLL1 initialization code from cpu_clock_init(). Called cpu_clock_pll1_low_speed() instead. 2013-09-04 16:22:41 -07:00
Jared Boone
189d245868 Merge remote-tracking branch 'TitanMKD/master' into titanmkd_overclock_fix 
Conflicts:
	firmware/hackrf_usb/hackrf_usb.c
 2013-09-04 12:41:03 -07:00
Jared Boone
a90c3b2324 Merge pull request #100 from jboone/master 
Incorporate bgamari changes for libopencm3 upstream.
 2013-09-02 11:10:11 -07:00
TitanMKD
24ed48d93a Fix for "issues/62 fix PLL1 overclock bug" see hackrf_core.c -> cpu_clock_init() 
Fix for "issues/78 startup current too high" see hackrf_core.c -> New functions cpu_clock_pll1_low_speed()/cpu_clock_pll1_max_speed() & hackrf_usb.c to switch low_speed/max_speed.
 2013-08-28 22:01:57 +02:00
Michael Ossmann
2648107a0b added dfu-util requirement 2013-08-11 14:56:32 -06:00
Ben Gamari
3642fe9bc6 usb_queue: Kill dead declaration 2013-07-10 10:12:59 -04:00
Ben Gamari
f6b41dbda5 fix2 2013-07-07 23:21:18 -04:00
Ben Gamari
b738cd5294 fix1 2013-07-07 23:21:11 -04:00
Ben Gamari
bb69f655b1 usb_queue: Use while instead of for 2013-07-07 21:58:06 -04:00
Ben Gamari
f50253eaa3 usb_queue: Use ldrex/strex to avoid disabling interrupts 2013-07-07 21:54:25 -04:00
Ben Gamari
e23cc9bd6c usb_queue: Disable interrupts when allocating transfer 2013-07-07 21:25:31 -04:00
Ben Gamari
cce17c42fd libopencm3: Update 2013-07-07 21:24:13 -04:00
Ben Gamari
df400eced6 Bump libopencm3 2013-07-07 21:08:57 -04:00
Ben Gamari
4822512dac Bump libopencm3 2013-07-07 18:51:50 -04:00
Ben Gamari
d30d7309d9 usb_queue: Mark queues as volatile 2013-07-07 17:50:54 -04:00
Ben Gamari
36cf222ef4 usb_queue: Add some interrupt disabling around critical sections 2013-07-07 17:50:53 -04:00
Ben Gamari
14526cd1c2 hackrf_usb: Be more careful in transceiver_mode check 2013-07-07 17:50:53 -04:00
Ben Gamari
9f2dca3e4e usb_standard_request: Always call configuration_changed_cb 
For reasons I don't entirely understand, bulk requests are suddenly
ignored after a SET_CONFIGURATION request (even if the configuration did
not change) unless the endpoints are reinitialized. This is done by
configuration_changed_cb, therefore we call it for every request.
 2013-07-07 17:50:53 -04:00
Ben Gamari
f12defebc6 usb: Ensure endpoint queue is flushed on disable/init 2013-07-07 17:50:53 -04:00
Ben Gamari
8fdc22f8c8 usb-queue: Add flush utility 2013-07-07 17:50:53 -04:00