hackrf

History

Jared Boone bafe97e302 Extract knowledge of RF path configurations from the RFFC5071 driver.

Change initial RF path mode to SWITCHCTRL_SAFE. (Previously started at SWITCHCTRL_SAFE and then immediately switched to SWITCHCTRL_AMP_BYPASS.)

2013-09-07 12:59:57 -07:00

blinky

firmware/: Use uint32_t instead of u32

2013-07-07 17:48:54 -04:00

blinky_rom_to_ram

Cleanup on xxx_rom_to_ram directory now it contains only makefile, removed redundant .c file from xxx dir.

2013-04-07 18:55:12 +02:00

common

Extract knowledge of RF path configurations from the RFFC5071 driver.

2013-09-07 12:59:57 -07:00

cpld

moved cpld stuff out of hardware/jellybean where people would be unlikely to look for it

2013-05-18 09:48:37 -06:00

cpldjtagprog

sgpio_if (top.vhd) CPLD VHDL fix for IQ/aliasing problems for ADC. (cpldjtagprog => sgpio_if_xsvf.h updated to rebuild).

2013-04-04 19:43:30 +02:00

cpldjtagprog_rom_to_ram

Cleanup on xxx_rom_to_ram directory now it contains only makefile, removed redundant .c file from xxx dir.

2013-04-07 18:55:12 +02:00

hackrf_usb

Extract knowledge of RF path configurations from the RFFC5071 driver.

2013-09-07 12:59:57 -07:00

hackrf_usb_rom_to_ram

renamed usb_performance to hackrf_usb

2013-05-18 08:51:34 -06:00

libopencm3 @ f92dbcdf60

Update libopencm3 submodule commit.

2013-09-06 16:02:01 -07:00

mixertx

Merge branch 'master' of https://github.com/mossmann/hackrf

2012-09-04 09:24:18 -07:00

sgpio

Consolidate a few clock setup tasks that repeat among many projects into cpu_clock_init().

2012-10-17 11:45:30 -07:00

sgpio_passthrough_rom_to_ram

Fixed some makefile and set default BOARD to JAWBREAKER (instead of JELLYBEAN).

2013-02-10 18:33:01 +01:00

sgpio-rx

firmware, lib: update comments, doc

2013-06-17 12:32:12 +02:00

simpletx

Moving gpio_setup() / pin_setup() functions in separate projects to hackrf_core.h/c.

2012-07-31 21:38:57 -07:00

spiflash

induce fewer seizures

2013-02-22 18:41:46 -07:00

startup

firmware/: Use uint32_t instead of u32

2013-07-07 17:48:54 -04:00

startup_systick

firmware/: Update #includes for libopencm3 merge

2013-07-07 17:48:54 -04:00

startup_systick_perfo

firmware/: Update #includes for libopencm3 merge

2013-07-07 17:48:54 -04:00

startup_systick_perfo_rom_to_ram

Cleanup on xxx_rom_to_ram directory now it contains only makefile, removed redundant .c file from xxx dir.

2013-04-07 18:55:12 +02:00

tools

Added two CGU debugging tools:

2013-09-04 16:34:20 -07:00

.gitignore

.gitignore additions: .dfu in /firmware, .pdf and .svg in /hardware

2013-03-07 14:56:32 -07:00

Makefile

renamed usb_performance to hackrf_usb

2013-05-18 08:51:34 -06:00

README

added dfu-util requirement

2013-08-11 14:56:32 -06:00

README

The primary firmware source code for USB HackRF devices is hackrf_usb.  Most of
the other directories contain firmware source code for test and development.
The common directory contains source code shared by multiple HackRF firmware
projects.  The cpld directory contains HDL source for the CPLD present on the
Jawbreaker and Jellybean designs.

The firmware is set up for compilation with the GCC toolchain available here:

https://code.launchpad.net/gcc-arm-embedded

Required dependency:

https://github.com/mossmann/libopencm3

For loading firmware into RAM with DFU you will also need:

git://git.openezx.org/dfu-util.git