TitanMKD
d509489fff
ssp1_set_mode_max2837()/void ssp1_set_mode_max5864(void) SPI speed updated to 4.857MHz instead of 0.0498MHz
...
To do test it to check there is no problem.
2013-03-20 22:20:47 +01:00
TitanMKD
7836911c45
fault_handler add more info in case of crash.
2013-03-10 14:23:26 +01:00
TitanMKD
6620fe6ba9
Add host(hackrf_info)/fw(usb_performance) IAP read part id/serial no(to be confirmed).
2013-03-09 11:47:28 +01:00
Michael Ossmann
1a2f871520
moved set_freq out of hackrf_core to facilitate switchctrl fixes
2013-03-07 17:35:48 -07:00
Michael Ossmann
052d842f36
temporary fix for gpo/switchctrl. only works for TX
2013-03-07 16:56:44 -07:00
TitanMKD
e3784c886e
set_freq for firmware & host. tested basicly checking with debugger value mhz/hz from host to fw.
2013-03-07 23:24:00 +01:00
TitanMKD
f9d72a7f87
Merge branch 'master' of git://github.com/mossmann/hackrf
2013-03-07 21:32:56 +01:00
Michael Ossmann
155a688d11
updated rffc test/commments
2013-03-07 10:35:49 -07:00
TitanMKD
e2c05fbfe2
Draft in progress (not tested at all) set_freq().
2013-02-26 00:17:18 +01:00
Michael Ossmann
85dfc2a930
implemented transceiver mode OFF
2013-02-24 15:13:39 -07:00
Michael Ossmann
771b93fe62
increased rffc5071 serial speed
2013-02-24 14:25:51 -07:00
Michael Ossmann
a74cd9fdf9
clear MAX2837 RXENABLE when going into TX mode and vice versa
2013-02-24 10:17:50 -07:00
Michael Ossmann
79587574b4
Merge pull request #31 from TitanMKD/master
...
jtagprog fixed for test
2013-02-23 10:26:05 -08:00
TitanMKD
0afc0813bf
jtagprog fixed. (to be checked by reading back the CPLD to be sure of the programming).
2013-02-23 18:52:56 +01:00
Michael Ossmann
d2b35517b3
firmware version string
2013-02-23 10:22:58 -07:00
Michael Ossmann
0874f9fe19
speed up SPI flash data rate
2013-02-22 18:42:17 -07:00
Michael Ossmann
653599ee9d
test program to program CPLD from microcontroller
2013-02-16 07:23:04 -07:00
Michael Ossmann
1b7eeaf83b
removed defunct lpc43.h
2013-02-14 17:52:52 -07:00
Michael Ossmann
6cf1721a28
cleanup
2013-02-14 17:52:29 -07:00
Michael Ossmann
415c364db1
attempted to implement waitTime() properly - not really sure
2013-02-14 17:43:28 -07:00
Michael Ossmann
907325aa12
CPLD JTAG GPIO
2013-02-14 17:23:45 -07:00
Michael Ossmann
de69b1f290
turned off debug mode
2013-02-14 16:55:24 -07:00
Michael Ossmann
23883aacce
tuned lenval.h MAX_LEN for CoolRunner/II
2013-02-14 16:04:20 -07:00
Michael Ossmann
435de16c02
source code from XAPP058 for CPLD programming from the microcontroller
2013-02-14 15:59:54 -07:00
Michael Ossmann
4fdffe5863
made some args consts
2013-02-14 15:35:49 -07:00
Michael Ossmann
7f252a2002
Do you ever forget your own preferred coding style?
2013-02-14 15:32:05 -07:00
Michael Ossmann
5a76816b54
program SPI flash with arbitrary data
2013-02-13 22:12:32 -07:00
Michael Ossmann
369f5eef4a
started a rudimentary driver for writing to SPI flash
2013-02-13 18:25:56 -07:00
TitanMKD
13a6b9086e
Fixed some makefile and set default BOARD to JAWBREAKER (instead of JELLYBEAN).
2013-02-10 18:33:01 +01:00
TitanMKD
d46a59fba3
Fix for LPC4330 MCU frequency to be set to 204MHz instead of 102MHz.
2012-11-26 23:41:13 +01:00
TitanMKD
a453d161ab
Fix problem with ".data" section which was not included, now it include all loadable section defined in elf.
2012-11-10 00:36:58 +01:00
TitanMKD
b8ede43963
Fix problem with .bin generated without .data section (only .text) !!
2012-11-09 22:18:25 +01:00
Jared Boone
cc5f1c61c7
Fix clock edge for TX mode. TX data was completely crapped up due to skew on my Jellybean/Lemondrop board. Hopefully, this also applies to Jawbreaker. I'll recheck once I have hardware in-hand.
2012-11-02 22:34:43 -07:00
Jared Boone
fc9632f19d
Add code to control MAX2837 B1 through B7 from Jellybean. Another feeble attempt to control DC bias.
2012-10-17 22:28:10 -07:00
Jared Boone
143d845b05
Add code to control RXHP pin on MAX2837 (Jellybean only). I was hoping this would control the baseband DC offset problem, but no, it doesn't seem to help at all.
2012-10-17 21:48:41 -07:00
Jared Boone
549c943979
Add USB control of LPF baseband filter.
...
Add max2837_set_lpf_bandwidth() function to choose available LPF filter bandwidth based on bandwidth in Hz.
Change configuration of MAX2837 to set LPF_EN and FT at max2837_setup(), not in max2837_rx() or max2837_tx() (which was overriding prior filter configuration).
2012-10-17 17:00:36 -07:00
Jared Boone
9c4a0e94b0
Factor out sample_rate_set() from cpu_clock_init().
...
Implement switching between several supported sampling rates for Jellybean and Jawbreaker.
Commit bits of the Si5351C USB request support that I apparently missed in a prior commit.
2012-10-17 16:57:26 -07:00
Jared Boone
6babcbe579
Add USB vendor requests to read/write Si5351C registers.
2012-10-17 11:57:44 -07:00
Jared Boone
7fdfde9314
Make use of i2c0_init() argument to control duty cycle, when APB1 clock shifts from IRC (~12MHz) to PLL1 (204MHz).
2012-10-17 11:48:35 -07:00
Jared Boone
63b1a25979
Consolidate a few clock setup tasks that repeat among many projects into cpu_clock_init().
2012-10-17 11:45:30 -07:00
Will Code
334366aac3
Merge remote-tracking branch 'upstream/master'
2012-10-14 08:15:23 -04:00
Jared Boone
d398cfcc1d
Use new ssp_transfer() function instead of ssp_write().
...
Implement max2837_spi_read().
2012-10-13 16:58:22 -07:00
Jared Boone
5a428a460f
Merge branch 'master' of https://github.com/mossmann/hackrf
2012-10-13 13:48:21 -07:00
Will Code
4c9df75d84
max2837: fix a couple math errors in the def file
2012-10-13 16:27:02 -04:00
Michael Ossmann
0d53da8593
fixed MAX2837 zero length register fields
2012-10-13 13:59:37 -06:00
Jared Boone
4cf0ba236d
Extended common Makefile to include targets for DFU file generation and programming.
2012-10-13 12:29:03 -07:00
Jared Boone
57866227bf
Remove weird LDSCRIPT that isn't necessary now.
...
Change .bin generation to include only ROM-able sections.
TODO: Is there a better way to do the objcopy? It'd be great to put everything in the "rom" region into the .bin, instead of having to list out -j section for each of the sections that go to ROM.
2012-10-13 11:37:54 -07:00
Jared Boone
168c92a3d0
Now that RxVGA gain control is working correctly, gain needs to be backed WAAAY off to get a usable capture in a fairly noisy 2.4GHz environment.
2012-10-13 11:07:17 -07:00
Jared Boone
f4b6f08500
Fixed incorrect field with for MAX2837 VGAgain_SPI_EN field. For boards that have no B7:B1 connections, this could prove extra problematic...and for boards that do, but aren't driving those pins from the LPC.
2012-10-13 11:06:39 -07:00
Jared Boone
9824a723b7
Moved invariant in sgpio_configure() loop out of loop. Originally, so I could use the value to calculate another invariant.
2012-10-12 09:45:18 -07:00
