hackrf

History

Michael Ossmann 79587574b4 Merge pull request #31 from TitanMKD/master

jtagprog fixed for test

2013-02-23 10:26:05 -08:00

xapp058

jtagprog fixed. (to be checked by reading back the CPLD to be sure of the programming).

2013-02-23 18:52:56 +01:00

bitband.c

Fix-ups to copyrights -- missing e-mail address and inconsistent formatting.

2012-10-06 19:14:55 -07:00

bitband.h

Fix-ups to copyrights -- missing e-mail address and inconsistent formatting.

2012-10-06 19:14:55 -07:00

cpld_jtag.c

jtagprog fixed. (to be checked by reading back the CPLD to be sure of the programming).

2013-02-23 18:52:56 +01:00

cpld_jtag.h

jtagprog fixed. (to be checked by reading back the CPLD to be sure of the programming).

2013-02-23 18:52:56 +01:00

fault_handler.c

Elimination of unused argument warnings.

2012-10-10 16:13:37 -07:00

fault_handler.h

Added fault handler header file, where I've defined the Cortex-M3/M4 SCB using a struct instead of a slew of #defines. This deviates from the libopencm3 method, but is superior in other ways. So, there you go. It's not in libopencm3, it's here.

2012-10-10 13:36:10 -07:00

hackrf_core.c

Fix for LPC4330 MCU frequency to be set to 204MHz instead of 102MHz.

2012-11-26 23:41:13 +01:00

hackrf_core.h

CPLD JTAG GPIO

2013-02-14 17:23:45 -07:00

LPC4330_M4_ROM_to_RAM.ld

Split ram_ahb memory region into two, with a 32K hole where the USB buffers live.

2012-10-10 14:27:21 -07:00

LPC4330_M4.ld

Split ram_ahb memory region into two, with a 32K hole where the USB buffers live.

2012-10-10 14:27:21 -07:00

Makefile_inc.mk

firmware version string

2013-02-23 10:22:58 -07:00

max2837_regs.def

max2837: fix a couple math errors in the def file

2012-10-13 16:27:02 -04:00

max2837.c

Add code to control MAX2837 B1 through B7 from Jellybean. Another feeble attempt to control DC bias.

2012-10-17 22:28:10 -07:00

max2837.h

Fixed some makefile and set default BOARD to JAWBREAKER (instead of JELLYBEAN).

2013-02-10 18:33:01 +01:00

max5864.c

Use new ssp_transfer() function instead of ssp_write().

2012-10-13 16:58:22 -07:00

max5864.h

Fix-ups to copyrights -- missing e-mail address and inconsistent formatting.

2012-10-06 19:14:55 -07:00

README

started firmware directory with some basic stuff

2012-05-21 11:33:46 -06:00

rffc5071_regs.def

Fix overflows in shifts, suppress warnings for temporarily unused variables.

2012-09-04 20:08:30 -04:00

rffc5071.c

Elimination of unused argument warnings.

2012-10-10 16:13:37 -07:00

rffc5071.h

RFFC tx and rx functions updated for Jawbreaker

2012-09-20 12:41:11 -06:00

sgpio.c

Fix clock edge for TX mode. TX data was completely crapped up due to skew on my Jellybean/Lemondrop board. Hopefully, this also applies to Jawbreaker. I'll recheck once I have hardware in-hand.

2012-11-02 22:34:43 -07:00

sgpio.h

Consolidated single-slice SGPIO configuration functions into single sgpio_configure() function.

2012-10-11 15:45:28 -07:00

si5351c.c

Fix-ups to copyrights -- missing e-mail address and inconsistent formatting.

2012-10-06 19:14:55 -07:00

si5351c.h

Add USB vendor requests to read/write Si5351C registers.

2012-10-17 11:57:44 -07:00

w25q80bv.c

speed up SPI flash data rate

2013-02-22 18:42:17 -07:00

w25q80bv.h

cleanup

2013-02-14 17:52:29 -07:00

README

This directory contains things shared by multiple HackRF firmware
implementations.