Dominic Spill
8b853266ef
Power down CLK3 (CLKOUT) at boot, don't reset it when clocks are reset
2017-02-28 15:26:43 -07:00
Dominic Spill
00b6099bb3
Make comments more informative (possibly)
2017-02-28 15:25:27 -07:00
Dominic Spill
e7f890e0c2
Merge branch 'mossmann-master' into firmware_cleanup
2017-02-22 12:10:42 -07:00
Dominic Spill
0a48dccd66
CLOKOUT off by default
2017-02-21 18:38:50 -07:00
Dominic Spill
acaf0d192c
Change RFFC5071 clock from 40MHz to 50MHz and invert it
...
Now the MAX2837 and RFFC5071 clocks are out of phase with each other
Hopefully this reduces some noise
2017-02-21 17:56:37 -07:00
Dominic Spill
15ea074bdb
Clean up Si5351c initialisation code
2017-02-21 17:43:19 -07:00
Dominic Spill
3eb00ed0df
Disable CLK7 and power down CLK6/7 to reduce emissions
2017-02-20 12:34:35 -07:00
schneider
d4c69890b5
fix(rad1o): Restore old clock behaviour for now.
2017-02-19 01:39:51 +01:00
Dominic Spill
ef695a36e0
Reinstate LPC4330 linker script
2017-02-17 07:49:16 -07:00
Dominic Spill
a4036eab76
Remove last mentions of Jellybean
2017-02-16 18:03:32 -07:00
Dominic Spill
c6be7dea3e
Fix build warnings for unused GPIO pins
2017-02-14 21:34:20 -07:00
Dominic Spill
49257e60e3
Remove Jellybean support from firmware
...
- nobody has a jellybean board
2017-02-14 21:33:52 -07:00
Michael Ossmann
6e3544ddec
Merge pull request #329 from schneider42/rad1o
...
rad1o support
2017-02-14 21:30:48 -07:00
Michael Ossmann
0335f1a317
Reverted 31a37bd841b99154fce7217d2b3d78a24f8aacd9 Output RFFC5072 LOCK status
...
This enabled a debug signal used during sweep mode development on HackRF One, but it broke Jawbreaker.
2017-02-11 12:24:22 -07:00
schneider42
4117cd3903
Merge branch 'master' into rad1o
2017-02-11 18:02:51 +01:00
Dominic Spill
c0396ea2fb
Reenable some clocks so that HackRF boots
2017-02-10 10:29:54 -07:00
Dominic Spill
2163ebac9c
Power down or disable all clocks that we aren't using
2017-02-09 21:23:58 -07:00
Dominic Spill
3de6d2d360
Disable EMC clock
2017-02-09 16:34:57 -07:00
schneider
5f46bce325
fix(rad1o): Restore hackrf max2837_freq_nominal_hz behaviour
2017-02-03 19:33:25 +01:00
schneider
c0c0fab368
chore(rad1o): White space fixes and cleanup
2017-02-03 19:27:19 +01:00
schneider
7526723f50
fix(cmake): Add max2871_regs.c to the build
2017-02-03 19:26:19 +01:00
schneider
c04b1cbc8d
Merge remote-tracking branch 'mossmann/master' into opera-merge
2017-02-03 16:25:32 +01:00
Dominic Spill
d61efc0c07
Remove experimental firmware code - never used in firmware
2017-02-01 16:02:08 -07:00
Dominic Spill
78182194e0
Turn off VBUS discharge to reduce current draw
2017-01-31 15:54:48 -07:00
schneider
642feac51e
Merge remote-tracking branch 'mossmann/master' into opera-merge
...
Conflicts:
firmware/common/hackrf_core.c
firmware/common/rf_path.c
firmware/hackrf-common.cmake
firmware/hackrf_usb/hackrf_usb.c
firmware/hackrf_usb/usb_api_transceiver.c
host/hackrf-tools/src/hackrf_transfer.c
2017-01-28 23:46:43 +01:00
schneider
f96ea4b8c2
change(usb): Make usb_phy_enable() non static
2017-01-28 22:32:27 +01:00
schneider
202f2ecf54
fix(mixer): Use correct pins for MAX2871
2017-01-28 22:31:00 +01:00
schneider
9d8890ae62
fix(rad1o): gpio cleanup
2017-01-27 21:42:48 +01:00
schneider
566c9ad4bd
feat(mixer): Full MAX2871 integration for rad1o
2017-01-27 21:41:24 +01:00
schneider
f063f87c49
fix(sgpio): Update rad1o update_q_invert gpio access
2017-01-27 20:51:44 +01:00
schneider
fb2057cd09
fix(rf_path): Port rad1o pin config
2017-01-27 20:45:49 +01:00
Dominic Spill
cb06ce9656
ifdef out HackRF One rf path pins for jawbreaker build
2017-01-27 12:24:19 -07:00
Michael Ossmann
a6b9f8f96d
fixed operacake indentation warning in firmware
2017-01-26 15:24:55 -07:00
schneider
70c41463b1
refact(mixer): Basic mixer abstraction
2017-01-26 00:31:43 +01:00
schneider
35ca538c18
Merge remote-tracking branch 'mossmann/master' into rad1o
...
Just a very rough merge to get off the ground. Major parts are not yet
implemented. The mixer intergration is in a messed up state. Part which
need work have been marked with XXX
Conflicts:
firmware/common/hackrf_core.c
firmware/common/hackrf_core.h
firmware/common/max2837.c
firmware/common/max2837.h
firmware/common/rf_path.c
firmware/common/rffc5071.c
firmware/common/rffc5071.h
firmware/common/sgpio.c
firmware/common/si5351c.c
firmware/common/tuning.c
firmware/common/w25q80bv.c
firmware/common/w25q80bv.h
firmware/common/xapp058/ports.c
firmware/hackrf-common.cmake
firmware/hackrf_usb/hackrf_usb.c
firmware/hackrf_usb/usb_api_register.c
firmware/hackrf_usb/usb_api_transceiver.c
host/hackrf-tools/src/hackrf_transfer.c
2017-01-26 00:21:58 +01:00
Michael Ossmann
3474ad50c0
Merge branch 'multi-device-hardware-sync' of https://github.com/dodgymike/hackrf into dodgymike-multi-device-hardware-sync
2017-01-24 16:18:33 -07:00
Dominic Spill
60f64928d3
Merge branch 'master' into operacake
2017-01-23 17:50:09 -07:00
Mike Davis
ddb19a86fe
Add vendor request for enabling/disabling gpio-based sync
2017-01-22 22:28:11 +02:00
Mike Davis
4b4cd181d8
Sync ready
2017-01-03 22:25:32 +02:00
Mike Walters
31a37bd841
Output RFFC5072 LOCK status
2016-12-27 21:08:12 +00:00
Mike Walters
f7bdbb07d8
Speed up RFFC5072 comms by 50%!
2016-12-27 21:08:12 +00:00
Mike Walters
303334870f
Don't bother setting path 1 when tuning RFFC5072
...
Mixer path 1 only exists in the RFFC5071
2016-12-27 21:08:12 +00:00
Dominic Spill
b528af46c1
Tidy unused operacake code and use addresses to refer to boards
2016-12-25 11:01:55 +00:00
Dominic Spill
c54e31f397
Add support for multiple operacake boards connected to one HackRF
2016-12-23 21:59:45 +00:00
Dominic Spill
1cec9ad4db
Add Operacake USB API (firmware)
2016-12-19 21:50:29 -07:00
Dominic Spill
bd1111a2e3
Fix silly polarity issues
2016-12-13 19:23:19 -07:00
Dominic Spill
0ef1666c2a
Add initial operacake support
2016-12-13 19:07:11 -07:00
Dominic Spill
cde5ef5bb7
Fix multibyte reads over i2c
2016-12-13 19:05:49 -07:00
Mike Davis
976c99c1ad
Kind of working hardware sync
2016-12-10 21:42:20 +02:00
Mike Davis
3672f38b27
Experiments with gpio pins, for hardware sync
2016-12-10 18:47:38 +02:00
