It's using the product string for now, but there are other
things that we could check too. Use -i to ignore the check.
rad1o badge will always pass the check because it uses
"HackRF" as the product string, whichis a substring of both
other devices..
this allows to remove function cast at prepare_transfers()
missing 'LIBUSB_CALL' produced problems in debugger with Visual Studio 2017
Signed-off-by: hayati ayguen <h_ayguen@web.de>
=======================================
This commit allows to synchronise multiple HackRFs with a synchronisation error **below 1 sampling period**
> WARNING: Use this at your own risk. If you don't know what you are doing you may damage your HackRF.
> The author takes no responsability for potential damages
Usage example: synchronise two HackRFs
======================================
1. Chose the master HackRF which will send the synchronisation pulse (HackRF0). HackRF1 will represent the slave hackrf.
2. Retreive the serial number of both HackRFs using `hackrf_info`
3. Use a wire to connect `SYNC_CMD` of HackRF0 to `SYNC_IN` of HackRF0 and HackRF1
4. Run `hackrf_transfer` with the argument `-H 1` to enable hardware synchronisation:
```
$ hackrf_tranfer ... -r rec1.bin -d HackRF1_serial -H 1 | hackrf_transfer ... -r rec0.bin -d HackRF0_serial -H 1
```
rec0.bin and rec1.bin will have a time offset below 1 sampling period.
The 1PPS output of GNSS receivers can be used to synchronise HackRFs even if they are far from each other.
>DON'T APPLY INCOMPATIBLE VOLTAGE LEVELS TO THE CPLD PINS
Signal | Header |Pin | Description
-------|--------|----|------------
`SYNC_IN` | P28 | 16 | Synchronisation pulse input
`SYNC_CMD` | P28 | 15 | Synchronisation pulse output
Note:
=====
I had to remove CPLD-based decimation to use a GPIO for enabling hardware.
More info:
==========
[M. Bartolucci, J. A. Del Peral-Rosado, R. Estatuet-Castillo, J. A. Garcia-Molina, M. Crisci and G. E. Corazza, "Synchronisation of low-cost open source SDRs for navigation applications," 2016 8th ESA Workshop on Satellite Navigation Technologies and European Workshop on GNSS Signals and Signal Processing (NAVITEC), Noordwijk, 2016, pp. 1-7.](http://ieeexplore.ieee.org/document/7849328/)
[Alternative link](http://spcomnav.uab.es/docs/conferences/Bartolucci_NAVITEC_2016.pdf)
