Michael Ossmann
06f98a3968
reverted a2e436e from incorrect merge
2013-12-24 23:14:17 -07:00
Michael Ossmann
a2e436e3a8
tester changes
2013-12-20 14:44:21 -07:00
Michael Ossmann
6b482b94da
set crystal load capacitance to 8 pF
2013-12-12 15:47:00 -07:00
Michael Ossmann
355597d9e6
swapped CPLD JTAG pins for HackRF One 20131127
2013-12-09 19:06:24 -07:00
Michael Ossmann
040aafc399
blinky update for HackRF One
2013-11-27 02:33:45 -07:00
Michael Ossmann
99803c26cb
another clock strength adjustment
2013-11-22 17:50:10 -07:00
Michael Ossmann
ebaccf46f4
adjusted clock generator output drive strength
2013-11-22 17:24:53 -07:00
Michael Ossmann
5b14636c2c
initial firmware support for HackRF One
2013-11-19 10:01:26 -07:00
Jared Boone
a90c3b2324
Merge pull request #100 from jboone/master
...
Incorporate bgamari changes for libopencm3 upstream.
2013-09-02 11:10:11 -07:00
Michael Ossmann
2648107a0b
added dfu-util requirement
2013-08-11 14:56:32 -06:00
Ben Gamari
4822512dac
Bump libopencm3
2013-07-07 18:51:50 -04:00
Ben Gamari
2717b7534e
firmware/: Update #includes for libopencm3 merge
2013-07-07 17:48:54 -04:00
Ben Gamari
3dbe817b09
firmware/: Use uint32_t instead of u32
2013-07-07 17:48:54 -04:00
Ben Gamari
1bbe375746
A few more changes due to the libopencm3 merge
2013-07-07 17:48:54 -04:00
Ben Gamari
98f30188c1
Ensure that LPC43XX is defined for libopencm3
2013-07-07 17:48:54 -04:00
Ben Gamari
ddd7d8ca71
Fix NVIC interrupt macro names
...
In libopencm3 master the NVIC macros are prefixed with NVIC_ not
NVIC_M4_
2013-07-07 17:48:54 -04:00
Ben Gamari
fac5d0dfba
Bump libopencm3
2013-07-07 17:48:54 -04:00
Ben Gamari
0972829ce5
usb: Rework configuration change notification
2013-07-01 00:25:22 -04:00
Ben Gamari
8a529617e5
Build against libopencm3 submodule tree by default
2013-07-01 00:21:49 -04:00
Ben Gamari
21a83179d8
Add libopencm3 submodule
2013-07-01 00:21:27 -04:00
Hoernchen
b33f534da0
firmware, lib: update comments, doc
2013-06-17 12:32:12 +02:00
Hoernchen
839a1a170f
fw: dc offset correction fix
...
pins b7 & b6 are floating, disable re-triggering
selecting a different HPC_STOP fixes the dc offset drift
disabling and enabling rx/tx after tuning triggers the dc offset
correction
2013-06-16 20:26:02 +02:00
Hoernchen
3f6c91a5db
firmware: automagically update freq when changing the if freq
2013-06-16 20:25:36 +02:00
Hoernchen
8063bd8207
firmware: if precision
2013-06-16 20:24:32 +02:00
Hoernchen
a6696de1d2
fw: ack
2013-06-16 20:24:19 +02:00
Hoernchen
bee537dc01
firmware: rffc frac, if gain
2013-06-16 20:23:47 +02:00
Hoernchen
8f55436cd1
firmware: fix a warning
2013-06-09 09:15:35 -06:00
Hoernchen
deafbab9fc
lib: make sure to tell the linker that we're hardfloat, or it will choose the wrong libgcc.a...
2013-06-09 00:10:05 +02:00
Hoernchen
fe7558fcf3
lib/fw: rename the sample rate function
2013-06-09 00:09:46 +02:00
Sylvain Munaut
f0c7fe66f1
firmware: New fractional sample rate algorithm and usb command
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-06-09 00:08:18 +02:00
Hoernchen
1e326997ed
firmware: enable int mode if div is even integer
...
to improve jitter performance
2013-06-07 23:10:35 +02:00
Hoernchen
1925649a01
firmware: fractional sample rates
2013-06-07 14:29:14 +02:00
Sylvain Munaut
472bcd414a
firmware/build: Use gnu99 coding convention
...
C99 doesn't require/support anonymous struct/unions in some GCC versions
and those are used a lot.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2013-06-06 22:52:40 +02:00
Hoernchen
a95f49b543
disable si clock to lpc
...
leaving it on but unused causes major spurs to appear all over the
place..
2013-06-05 17:35:01 +02:00
Hoernchen
b6a0b09b1d
firmware: remove 5mhz option
2013-05-29 17:47:02 +02:00
Hoernchen
7f6a730c6e
si clock for the lpc
2013-05-29 17:12:06 +02:00
Hoernchen
233c56c79d
libhackrf/firmware: merge txvga gain into one gain range of 0-47
2013-05-29 00:53:41 +02:00
Hoernchen
19e8628650
firmware: fix plus 16db tx gain
2013-05-27 15:28:51 +02:00
Hoernchen
abc3cd1f4f
firmware: gain control
2013-05-27 14:01:22 +02:00
Michael Ossmann
9276b9e89a
moved cpld stuff out of hardware/jellybean where people would be unlikely to look for it
2013-05-18 09:48:37 -06:00
Michael Ossmann
389cbc6ac4
renamed usb_performance to hackrf_usb
2013-05-18 08:51:34 -06:00
TitanMKD
18932692ab
Updated hackrf_transfer(host) and ubs_performance(firmware) extended frequency range from 5MHz to 6800MHz.
2013-05-17 23:41:32 +02:00
Michael Ossmann
60d21a3310
commenting out CGU_PLL1_CTRL_DIRECT=1 because it breaks boot from spifi
2013-05-11 18:55:00 -06:00
Jared Boone
d0e609429d
Merge branch 'master' of https://github.com/mossmann/hackrf
2013-05-11 16:59:00 -07:00
Jared Boone
1723cd12a1
Oops, read PLL1 documentation again. Looks like FBSEL=1 is for "normal operation". So include that, but use DIRECT=1 to skip the PSEL divider (which would prevent us producing 204MHz from an in-spec PLL frequency).
2013-05-11 12:25:54 -07:00
Jared Boone
e065cdfe20
Slowed down edges on LED and power enable signals -- they don't need to be fast, and this *might* have a negligible but positive effect on noise.
2013-05-11 12:13:00 -07:00
Jared Boone
d9884af8b8
PLL1 was misconfigured to run at 408MHz (way out of spec) instead of 204MHz. Corrected this by using DIRECT=1 instead of FBSEL=1.
2013-05-11 12:11:37 -07:00
Jared Boone
a4a2a3d6ba
Added SCU pinmux data for USB LEDs, configured USB LEDs to be outputs (not float).
2013-05-11 08:09:07 -07:00
TitanMKD
418680aed2
Fixed libhackrf, hackrf_cpldjtag (host) & usb_performance (firmware) to update CPLD through USB.
...
Use latest CPLD bitstream with following command line:
hackrf_cpldjtag.exe -x hackrf\hardware\jellybean\sgpio_if\default.xsvf
2013-05-09 00:29:42 +02:00
TitanMKD
8777f93721
Cleanup on xxx_rom_to_ram directory now it contains only makefile, removed redundant .c file from xxx dir.
...
Fixed IAP "IAP_CMD_READ_SERIAL_NO" for LPC43xx flashless part not supporting IAP by using SPIFI w25q80bv Unique ID(64bits).
Fixed SPIFI erase/program also now it with check SPIFI w25q80bv Device ID = 0x13 at start of w25q80bv_setup()/w25q80bv_chip_erase()/w25q80bv_program().
2013-04-07 18:55:12 +02:00