Sojus07/hackrf
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

fixed inconsistent naming of mixer pins

Browse Source
This commit is contained in:
Michael Ossmann
2012-06-14 10:44:22 -06:00
parent 0075099969
commit 68f9a1c6e4
3 changed files with 31 additions and 31 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
firmware/common/hackrf_core.h
View File

@ -94,8 +94,8 @@ extern "C"
/* RFFC5071 GPIO serial interface PinMux */
#define SCU_MIXER_ENX (P7_0) /* GPIO3[8] on P7_0 */
#define SCU_MIXER_CLK (P7_1) /* GPIO3[9] on P7_1 */
#define SCU_MIXER_DATA (P7_2) /* GPIO3[10] on P7_2 */
#define SCU_MIXER_SCLK (P7_1) /* GPIO3[9] on P7_1 */
#define SCU_MIXER_SDATA (P7_2) /* GPIO3[10] on P7_2 */
/* TODO add other Pins */
@ -120,10 +120,10 @@ extern "C"
#define PIN_CS_AD (BIT7) /* GPIO2[7] on P5_7 */
#define PORT_CS_AD (GPIO2) /* PORT for CS_AD */
#define PIN_MIXER_ENX (BIT8) /* GPIO3[8] on P7_0 */
#define PIN_MIXER_CLK (BIT9) /* GPIO3[9] on P7_1 */
#define PIN_MIXER_DATA (BIT10) /* GPIO3[10] on P7_2 */
#define PORT_MIXER (GPIO3) /* PORT for mixer serial interface */
#define PIN_MIXER_ENX (BIT8) /* GPIO3[8] on P7_0 */
#define PIN_MIXER_SCLK (BIT9) /* GPIO3[9] on P7_1 */
#define PIN_MIXER_SDATA (BIT10) /* GPIO3[10] on P7_2 */
#define PORT_MIXER (GPIO3) /* PORT for mixer serial interface */
/* GPIO Input */
#define PIN_BOOT0 (BIT8) /* GPIO0[8] on P1_1 */
@ -146,7 +146,7 @@ extern "C"
#define BOOT1_STATE ((GPIO0_PIN & PIN_BOOT1)==PIN_BOOT1)
#define BOOT2_STATE ((GPIO5_PIN & PIN_BOOT2)==PIN_BOOT2)
#define BOOT3_STATE ((GPIO1_PIN & PIN_BOOT3)==PIN_BOOT3)
#define MIXER_DATA_STATE ((GPIO3_PIN & PIN_MIXER_DATA)==PIN_MIXER_DATA)
#define MIXER_SDATA_STATE ((GPIO3_PIN & PIN_MIXER_SDATA)==PIN_MIXER_SDATA)
/* TODO add other Pins */
#endif

46
firmware/common/rffc5071.c
View File

@ -31,15 +31,15 @@ void rffc5071_init(void)
{
/* Configure GPIO pins. */
scu_pinmux(SCU_MIXER_ENX, SCU_GPIO_FAST);
scu_pinmux(SCU_MIXER_CLK, SCU_GPIO_FAST);
scu_pinmux(SCU_MIXER_DATA, SCU_GPIO_FAST);
scu_pinmux(SCU_MIXER_SCLK, SCU_GPIO_FAST);
scu_pinmux(SCU_MIXER_SDATA, SCU_GPIO_FAST);
/* Set GPIO pins as outputs. */
GPIO3_DIR |= (PIN_MIXER_ENX | PIN_MIXER_CLK | PIN_MIXER_DATA);
GPIO3_DIR |= (PIN_MIXER_ENX | PIN_MIXER_SCLK | PIN_MIXER_SDATA);
/* set to known state */
gpio_set(PORT_MIXER, PIN_MIXER_ENX); /* active low */
gpio_clear(PORT_MIXER, (PIN_MIXER_CLK | PIN_MIXER_DATA));
gpio_clear(PORT_MIXER, (PIN_MIXER_SCLK | PIN_MIXER_SDATA));
//FIXME no writes until we get reads sorted:
return;
@ -103,7 +103,7 @@ void rffc5071_reg_write(uint8_t reg, uint16_t val)
/* make sure everything is starting in the correct state */
gpio_set(PORT_MIXER, PIN_MIXER_ENX);
gpio_clear(PORT_MIXER, (PIN_MIXER_CLK | PIN_MIXER_DATA));
gpio_clear(PORT_MIXER, (PIN_MIXER_SCLK | PIN_MIXER_SDATA));
serial_delay();
/* start transaction by bringing ENX low */
@ -112,16 +112,16 @@ void rffc5071_reg_write(uint8_t reg, uint16_t val)
while (bits--) {
if (data & msb)
gpio_set(PORT_MIXER, PIN_MIXER_DATA);
gpio_set(PORT_MIXER, PIN_MIXER_SDATA);
else
gpio_clear(PORT_MIXER, PIN_MIXER_DATA);
gpio_clear(PORT_MIXER, PIN_MIXER_SDATA);
data <<= 1;
serial_delay();
gpio_set(PORT_MIXER, PIN_MIXER_CLK);
gpio_set(PORT_MIXER, PIN_MIXER_SCLK);
serial_delay();
gpio_clear(PORT_MIXER, PIN_MIXER_CLK);
gpio_clear(PORT_MIXER, PIN_MIXER_SCLK);
}
serial_delay();
@ -143,7 +143,7 @@ uint16_t rffc5071_reg_read(uint8_t reg)
/* make sure everything is starting in the correct state */
gpio_set(PORT_MIXER, PIN_MIXER_ENX);
gpio_clear(PORT_MIXER, (PIN_MIXER_CLK | PIN_MIXER_DATA));
gpio_clear(PORT_MIXER, (PIN_MIXER_SCLK | PIN_MIXER_SDATA));
serial_delay();
/* start transaction by bringing ENX low */
@ -152,42 +152,42 @@ uint16_t rffc5071_reg_read(uint8_t reg)
while (bits--) {
if (data & msb)
gpio_set(PORT_MIXER, PIN_MIXER_DATA);
gpio_set(PORT_MIXER, PIN_MIXER_SDATA);
else
gpio_clear(PORT_MIXER, PIN_MIXER_DATA);
gpio_clear(PORT_MIXER, PIN_MIXER_SDATA);
data <<= 1;
serial_delay();
gpio_set(PORT_MIXER, PIN_MIXER_CLK);
gpio_set(PORT_MIXER, PIN_MIXER_SCLK);
serial_delay();
gpio_clear(PORT_MIXER, PIN_MIXER_CLK);
gpio_clear(PORT_MIXER, PIN_MIXER_SCLK);
}
serial_delay();
gpio_set(PORT_MIXER, PIN_MIXER_CLK);
gpio_set(PORT_MIXER, PIN_MIXER_SCLK);
serial_delay();
gpio_clear(PORT_MIXER, PIN_MIXER_CLK);
gpio_clear(PORT_MIXER, PIN_MIXER_SCLK);
bits = 16;
data = 0;
/* set DATA line as input */
GPIO3_DIR &= ~PIN_MIXER_DATA;
/* set SDATA line as input */
GPIO3_DIR &= ~PIN_MIXER_SDATA;
while (bits--) {
data <<= 1;
serial_delay();
gpio_set(PORT_MIXER, PIN_MIXER_CLK);
gpio_set(PORT_MIXER, PIN_MIXER_SCLK);
serial_delay();
gpio_clear(PORT_MIXER, PIN_MIXER_CLK);
if (MIXER_DATA_STATE)
gpio_clear(PORT_MIXER, PIN_MIXER_SCLK);
if (MIXER_SDATA_STATE)
data |= 1;
}
/* set DATA line as output */
GPIO3_DIR |= PIN_MIXER_DATA;
/* set SDATA line as output */
GPIO3_DIR |= PIN_MIXER_SDATA;
serial_delay();
gpio_set(PORT_MIXER, PIN_MIXER_ENX);

2
firmware/mixertx/README
View File

@ -20,7 +20,7 @@ GND: Lollipop P8 pin 1, 3, or 5 -> Jellybean P17 pin 1, 3, or 5
VCC: Lollipop P8 pin 2, 4, or 6 -> Jellybean P17 pin 2, 4, or 6
ENX: Lollipop P4 pin 5 -> Jellybean P5 pin 1
SCLK: Lollipop P4 pin 3 -> Jellybean P5 pin 3
DATA: Lollipop P4 pin 1 -> Jellybean P5 pin 5
SDATA: Lollipop P4 pin 1 -> Jellybean P5 pin 5
Also RF connectors, and you're on your own to get the RF switches configured
properly.