Sojus07/hackrf
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
hackrf/firmware/hackrf_usb
History
Martin Ling cca7320fe4 Add a wait mode for the M0. 
In wait mode, the byte counter is advanced, but no SGPIO read/writes are
done. This mode is intended to be used for implementing timed operations.
2022-02-13 16:46:12 +00:00
..
CMakeLists.txt
Add USB vendor request to read M0 state, and host support for doing so.
2022-02-13 16:46:12 +00:00
hackrf_usb.c
Add USB requests and host support to set TX/RX shortfall limits.
2022-02-13 16:46:12 +00:00
m0_state.c
Add USB vendor request to read M0 state, and host support for doing so.
2022-02-13 16:46:12 +00:00
m0_state.h
Add a wait mode for the M0.
2022-02-13 16:46:12 +00:00
sgpio_m0.s
Add a wait mode for the M0.
2022-02-13 16:46:12 +00:00
usb_api_board_info.c
Add software controlled reset
2017-01-27 15:03:53 -07:00
usb_api_board_info.h
Add software controlled reset
2017-01-27 15:03:53 -07:00
usb_api_cpld.c
firmware: clean up transceiver modes
2020-02-11 16:59:59 +00:00
usb_api_cpld.h
firmware: clean up transceiver modes
2020-02-11 16:59:59 +00:00
usb_api_operacake.c
clear frequency ranges before adding new ones
2021-12-12 13:25:44 -07:00
usb_api_operacake.h
operacake: add API function to set port dwell times
2021-10-14 14:41:52 +01:00
usb_api_register.c
hackrf_clock: Allow CLKOUT to be enabled / disabled
2017-11-07 11:23:48 -07:00
usb_api_register.h
hackrf_clock: Allow CLKOUT to be enabled / disabled
2017-11-07 11:23:48 -07:00
usb_api_spiflash.c
SPI Flash: add function to clear SPI flash status register
2017-11-06 10:42:19 -07:00
usb_api_spiflash.h
SPI Flash: add function to clear SPI flash status register
2017-11-06 10:42:19 -07:00
usb_api_sweep.c
Add a second counter to keep track of bytes transferred by the M4.
2022-02-13 16:46:12 +00:00
usb_api_sweep.h
Increment a sequence number when transceiver mode changes.
2022-02-03 07:36:34 +00:00
usb_api_transceiver.c
Add a counter threshold at which the M0 will change to a new mode.
2022-02-13 16:46:12 +00:00
usb_api_transceiver.h
Add USB requests and host support to set TX/RX shortfall limits.
2022-02-13 16:46:12 +00:00
usb_api_ui.c
Add option to disable HackRF UI
2020-01-22 21:23:30 +00:00
usb_api_ui.h
Add option to disable HackRF UI
2020-01-22 21:23:30 +00:00
usb_bulk_buffer.h
Add defines for USB bulk buffer size & mask.
2022-02-13 16:46:12 +00:00
usb_descriptor.c
Add USB vendor request to read M0 state, and host support for doing so.
2022-02-13 16:46:12 +00:00
usb_descriptor.h
Add Windows Compatible ID descriptors
2016-07-17 22:20:32 +01:00
usb_device.c
Add Windows Compatible ID descriptors
2016-07-17 22:20:32 +01:00
usb_device.h
Broke some application-specific USB code into separate files within hackrf_usb/. Hoping I can use them as necessary in other projects, or push them into a library eventually.
2013-09-19 19:51:32 -07:00
usb_endpoint.c
Change USB bulk endpoint for baseband data to have only one queue item. Since there are only two baseband buffers, and one is transferring with the codec and the other with USB, enqueueing more than one buffer at a time would result in transferring an incomplete buffer.
2013-12-31 20:34:01 -08:00
usb_endpoint.h
Broke some application-specific USB code into separate files within hackrf_usb/. Hoping I can use them as necessary in other projects, or push them into a library eventually.
2013-09-19 19:51:32 -07:00