342 lines
11 KiB
C
342 lines
11 KiB
C
/*
|
|
* Copyright 2012 Michael Ossmann
|
|
* Copyright (C) 2012 Jared Boone
|
|
*
|
|
* This file is part of HackRF.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, Inc., 51 Franklin Street,
|
|
* Boston, MA 02110-1301, USA.
|
|
*/
|
|
|
|
#include <libopencm3/lpc43xx/gpio.h>
|
|
#include <libopencm3/lpc43xx/scu.h>
|
|
#include <libopencm3/lpc43xx/sgpio.h>
|
|
#include <libopencm3/lpc43xx/cgu.h>
|
|
#include <libopencm3/cm3/scs.h>
|
|
|
|
#include <hackrf_core.h>
|
|
#include <max5864.h>
|
|
#include <max2837.h>
|
|
|
|
void pin_setup(void) {
|
|
/* Configure SCU Pin Mux as GPIO */
|
|
scu_pinmux(SCU_PINMUX_LED1, SCU_GPIO_FAST);
|
|
scu_pinmux(SCU_PINMUX_LED2, SCU_GPIO_FAST);
|
|
scu_pinmux(SCU_PINMUX_LED3, SCU_GPIO_FAST);
|
|
|
|
scu_pinmux(SCU_PINMUX_EN1V8, SCU_GPIO_FAST);
|
|
|
|
/* Configure all GPIO as Input (safe state) */GPIO0_DIR = 0;
|
|
GPIO1_DIR = 0;
|
|
GPIO2_DIR = 0;
|
|
GPIO3_DIR = 0;
|
|
GPIO4_DIR = 0;
|
|
GPIO5_DIR = 0;
|
|
GPIO6_DIR = 0;
|
|
GPIO7_DIR = 0;
|
|
|
|
/* Configure GPIO2[1/2/8] (P4_1/2 P6_12) as output. */
|
|
GPIO2_DIR |= (PIN_LED1 | PIN_LED2 | PIN_LED3);
|
|
|
|
/* GPIO3[6] on P6_10 as output. */
|
|
GPIO3_DIR |= PIN_EN1V8;
|
|
|
|
/* Configure SSP1 Peripheral (to be moved later in SSP driver) */
|
|
scu_pinmux(SCU_SSP1_MISO, (SCU_SSP_IO | SCU_CONF_FUNCTION5));
|
|
scu_pinmux(SCU_SSP1_MOSI, (SCU_SSP_IO | SCU_CONF_FUNCTION5));
|
|
scu_pinmux(SCU_SSP1_SCK, (SCU_SSP_IO | SCU_CONF_FUNCTION1));
|
|
scu_pinmux(SCU_SSP1_SSEL, (SCU_SSP_IO | SCU_CONF_FUNCTION1));
|
|
}
|
|
|
|
void enable_1v8_power() {
|
|
gpio_set(PORT_EN1V8, PIN_EN1V8);
|
|
}
|
|
|
|
void release_cpld_jtag_pins() {
|
|
scu_pinmux(SCU_PINMUX_CPLD_TDO, SCU_GPIO_NOPULL | SCU_CONF_FUNCTION4);
|
|
scu_pinmux(SCU_PINMUX_CPLD_TCK, SCU_GPIO_NOPULL | SCU_CONF_FUNCTION0);
|
|
scu_pinmux(SCU_PINMUX_CPLD_TMS, SCU_GPIO_NOPULL | SCU_CONF_FUNCTION0);
|
|
scu_pinmux(SCU_PINMUX_CPLD_TDI, SCU_GPIO_NOPULL | SCU_CONF_FUNCTION0);
|
|
|
|
GPIO_DIR(PORT_CPLD_TDO) &= ~PIN_CPLD_TDO;
|
|
GPIO_DIR(PORT_CPLD_TCK) &= ~PIN_CPLD_TCK;
|
|
GPIO_DIR(PORT_CPLD_TMS) &= ~PIN_CPLD_TMS;
|
|
GPIO_DIR(PORT_CPLD_TDI) &= ~PIN_CPLD_TDI;
|
|
}
|
|
|
|
void configure_sgpio_pin_functions() {
|
|
scu_pinmux(SCU_PINMUX_SGPIO0, SCU_GPIO_FAST | SCU_CONF_FUNCTION3);
|
|
scu_pinmux(SCU_PINMUX_SGPIO1, SCU_GPIO_FAST | SCU_CONF_FUNCTION3);
|
|
scu_pinmux(SCU_PINMUX_SGPIO2, SCU_GPIO_FAST | SCU_CONF_FUNCTION2);
|
|
scu_pinmux(SCU_PINMUX_SGPIO3, SCU_GPIO_FAST | SCU_CONF_FUNCTION2);
|
|
scu_pinmux(SCU_PINMUX_SGPIO4, SCU_GPIO_FAST | SCU_CONF_FUNCTION2);
|
|
scu_pinmux(SCU_PINMUX_SGPIO5, SCU_GPIO_FAST | SCU_CONF_FUNCTION2);
|
|
scu_pinmux(SCU_PINMUX_SGPIO6, SCU_GPIO_FAST | SCU_CONF_FUNCTION0);
|
|
scu_pinmux(SCU_PINMUX_SGPIO7, SCU_GPIO_FAST | SCU_CONF_FUNCTION6);
|
|
scu_pinmux(SCU_PINMUX_SGPIO8, SCU_GPIO_FAST | SCU_CONF_FUNCTION6);
|
|
scu_pinmux(SCU_PINMUX_SGPIO9, SCU_GPIO_FAST | SCU_CONF_FUNCTION7);
|
|
scu_pinmux(SCU_PINMUX_SGPIO10, SCU_GPIO_FAST | SCU_CONF_FUNCTION6);
|
|
scu_pinmux(SCU_PINMUX_SGPIO11, SCU_GPIO_FAST | SCU_CONF_FUNCTION6);
|
|
scu_pinmux(SCU_PINMUX_SGPIO12, SCU_GPIO_FAST | SCU_CONF_FUNCTION6);
|
|
scu_pinmux(SCU_PINMUX_SGPIO13, SCU_GPIO_FAST | SCU_CONF_FUNCTION7);
|
|
scu_pinmux(SCU_PINMUX_SGPIO14, SCU_GPIO_FAST | SCU_CONF_FUNCTION7);
|
|
scu_pinmux(SCU_PINMUX_SGPIO15, SCU_GPIO_FAST | SCU_CONF_FUNCTION7);
|
|
}
|
|
|
|
void test_sgpio_interface() {
|
|
const uint_fast8_t host_clock_sgpio_pin = 8; // Input
|
|
const uint_fast8_t host_capture_sgpio_pin = 9; // Input
|
|
const uint_fast8_t host_disable_sgpio_pin = 10; // Output
|
|
const uint_fast8_t host_direction_sgpio_pin = 11; // Output
|
|
|
|
SGPIO_GPIO_OENREG = 0; // All inputs for the moment.
|
|
|
|
// Disable all counters during configuration
|
|
SGPIO_CTRL_ENABLE = 0;
|
|
|
|
configure_sgpio_pin_functions();
|
|
|
|
// Make all SGPIO controlled by SGPIO's "GPIO" registers
|
|
for (uint_fast8_t i = 0; i < 16; i++) {
|
|
SGPIO_OUT_MUX_CFG(i) = (0L << 4) | (4L << 0);
|
|
}
|
|
|
|
// Set SGPIO output values.
|
|
SGPIO_GPIO_OUTREG = (1L << host_direction_sgpio_pin)
|
|
| (1L << host_disable_sgpio_pin);
|
|
|
|
// Enable SGPIO pin outputs.
|
|
SGPIO_GPIO_OENREG = (1L << host_direction_sgpio_pin)
|
|
| (1L << host_disable_sgpio_pin) | (0L << host_capture_sgpio_pin)
|
|
| (0L << host_clock_sgpio_pin) | (0xFF << 0);
|
|
|
|
// Configure SGPIO slices.
|
|
|
|
// Enable codec data stream.
|
|
SGPIO_GPIO_OUTREG &= ~(1L << host_disable_sgpio_pin);
|
|
|
|
while (1) {
|
|
for (uint_fast8_t i = 0; i < 8; i++) {
|
|
SGPIO_GPIO_OUTREG ^= (1L << i);
|
|
}
|
|
}
|
|
}
|
|
|
|
void configure_sgpio_test_tx() {
|
|
// Disable all counters during configuration
|
|
SGPIO_CTRL_ENABLE = 0;
|
|
|
|
configure_sgpio_pin_functions();
|
|
|
|
// Set SGPIO output values.
|
|
SGPIO_GPIO_OUTREG =
|
|
(1L << 11) | // direction
|
|
(1L << 10); // disable
|
|
|
|
// Enable SGPIO pin outputs.
|
|
SGPIO_GPIO_OENREG =
|
|
(1L << 11) | // direction: TX: data to CPLD
|
|
(1L << 10) | // disable
|
|
(0L << 9) | // capture
|
|
(0L << 8) | // clock
|
|
0xFF; // data: output
|
|
|
|
SGPIO_OUT_MUX_CFG( 8) = 0; // SGPIO: Input: clock
|
|
SGPIO_OUT_MUX_CFG( 9) = 0; // SGPIO: Input: qualifier
|
|
SGPIO_OUT_MUX_CFG(10) = (0L << 4) | (4L << 0); // GPIO: Output: disable
|
|
SGPIO_OUT_MUX_CFG(11) = (0L << 4) | (4L << 0); // GPIO: Output: direction
|
|
|
|
for(uint_fast8_t i=0; i<8; i++) {
|
|
// SGPIO pin 0 outputs slice A bit "i".
|
|
SGPIO_OUT_MUX_CFG(i) =
|
|
(0L << 4) | // P_OE_CFG = 0
|
|
(9L << 0); // P_OUT_CFG = 9, dout_doutm8a (8-bit mode 8a)
|
|
}
|
|
|
|
// Slice A
|
|
SGPIO_MUX_CFG(SGPIO_SLICE_A) =
|
|
(0L << 12) | // CONCAT_ORDER = 0 (self-loop)
|
|
(1L << 11) | // CONCAT_ENABLE = 1 (concatenate data)
|
|
(0L << 9) | // QUALIFIER_SLICE_MODE = X
|
|
(1L << 7) | // QUALIFIER_PIN_MODE = 1 (SGPIO9)
|
|
(3L << 5) | // QUALIFIER_MODE = 3 (external SGPIO pin)
|
|
(0L << 3) | // CLK_SOURCE_SLICE_MODE = X
|
|
(0L << 1) | // CLK_SOURCE_PIN_MODE = 0 (SGPIO8)
|
|
(1L << 0); // EXT_CLK_ENABLE = 1, external clock signal
|
|
|
|
SGPIO_SLICE_MUX_CFG(SGPIO_SLICE_A) =
|
|
(0L << 8) | // INV_QUALIFIER = 0 (use normal qualifier)
|
|
(3L << 6) | // PARALLEL_MODE = 3 (shift 8 bits per clock)
|
|
(0L << 4) | // DATA_CAPTURE_MODE = 0 (detect rising edge)
|
|
(0L << 3) | // INV_OUT_CLK = 0 (normal clock)
|
|
(1L << 2) | // CLKGEN_MODE = 1 (use external pin clock)
|
|
(0L << 1) | // CLK_CAPTURE_MODE = 0 (use rising clock edge)
|
|
(0L << 0); // MATCH_MODE = 0 (do not match data)
|
|
|
|
SGPIO_PRESET(SGPIO_SLICE_A) = 0;
|
|
SGPIO_COUNT(SGPIO_SLICE_A) = 0;
|
|
SGPIO_POS(SGPIO_SLICE_A) = (0x3L << 8) | (0x3L << 0);
|
|
SGPIO_REG(SGPIO_SLICE_A) = 0x80808080; // Primary output data register
|
|
SGPIO_REG_SS(SGPIO_SLICE_A) = 0x80808080; // Shadow output data register
|
|
|
|
// Start SGPIO operation by enabling slice clocks.
|
|
SGPIO_CTRL_ENABLE =
|
|
(1L << SGPIO_SLICE_A)
|
|
;
|
|
|
|
// LSB goes out first, samples are 0x<Q1><I1><Q0><I0>
|
|
volatile uint32_t buffer[] = {
|
|
0xda808080,
|
|
0xda80ff80,
|
|
0x26808080,
|
|
0x26800180,
|
|
};
|
|
uint32_t i = 0;
|
|
|
|
// Enable codec data stream.
|
|
SGPIO_GPIO_OUTREG &= ~(1L << 10);
|
|
|
|
while(true) {
|
|
while(SGPIO_STATUS_1 == 0);
|
|
SGPIO_REG_SS(SGPIO_SLICE_A) = buffer[(i++) & 3];
|
|
SGPIO_CLR_STATUS_1 = 1;
|
|
}
|
|
}
|
|
|
|
void configure_sgpio_test_rx() {
|
|
// Disable all counters during configuration
|
|
SGPIO_CTRL_ENABLE = 0;
|
|
|
|
configure_sgpio_pin_functions();
|
|
|
|
// Set SGPIO output values.
|
|
SGPIO_GPIO_OUTREG =
|
|
(0L << 11) | // direction
|
|
(1L << 10); // disable
|
|
|
|
// Enable SGPIO pin outputs.
|
|
SGPIO_GPIO_OENREG =
|
|
(1L << 11) | // direction: RX: data from CPLD
|
|
(1L << 10) | // disable
|
|
(0L << 9) | // capture
|
|
(0L << 8) | // clock
|
|
0x00; // data: input
|
|
|
|
SGPIO_OUT_MUX_CFG( 8) = 0; // SGPIO: Input: clock
|
|
SGPIO_OUT_MUX_CFG( 9) = 0; // SGPIO: Input: qualifier
|
|
SGPIO_OUT_MUX_CFG(10) = (0L << 4) | (4L << 0); // GPIO: Output: disable
|
|
SGPIO_OUT_MUX_CFG(11) = (0L << 4) | (4L << 0); // GPIO: Output: direction
|
|
|
|
for(uint_fast8_t i=0; i<8; i++) {
|
|
SGPIO_OUT_MUX_CFG(i) =
|
|
(0L << 4) | // P_OE_CFG = 0
|
|
(9L << 0); // P_OUT_CFG = 9, dout_doutm8a (8-bit mode 8a)
|
|
}
|
|
|
|
// Slice A
|
|
SGPIO_MUX_CFG(SGPIO_SLICE_A) =
|
|
(0L << 12) | // CONCAT_ORDER = X
|
|
(0L << 11) | // CONCAT_ENABLE = 0 (concatenate data)
|
|
(0L << 9) | // QUALIFIER_SLICE_MODE = X
|
|
(1L << 7) | // QUALIFIER_PIN_MODE = 1 (SGPIO9)
|
|
(3L << 5) | // QUALIFIER_MODE = 3 (external SGPIO pin)
|
|
(0L << 3) | // CLK_SOURCE_SLICE_MODE = X
|
|
(0L << 1) | // CLK_SOURCE_PIN_MODE = 0 (SGPIO8)
|
|
(1L << 0); // EXT_CLK_ENABLE = 1, external clock signal
|
|
|
|
SGPIO_SLICE_MUX_CFG(SGPIO_SLICE_A) =
|
|
(0L << 8) | // INV_QUALIFIER = 0 (use normal qualifier)
|
|
(3L << 6) | // PARALLEL_MODE = 3 (shift 8 bits per clock)
|
|
(0L << 4) | // DATA_CAPTURE_MODE = 0 (detect rising edge)
|
|
(0L << 3) | // INV_OUT_CLK = X
|
|
(1L << 2) | // CLKGEN_MODE = 1 (use external pin clock)
|
|
(1L << 1) | // CLK_CAPTURE_MODE = 1 (use falling clock edge)
|
|
(0L << 0); // MATCH_MODE = 0 (do not match data)
|
|
|
|
SGPIO_PRESET(SGPIO_SLICE_A) = 0;
|
|
SGPIO_COUNT(SGPIO_SLICE_A) = 0;
|
|
SGPIO_POS(SGPIO_SLICE_A) = (0x3L << 8) | (0x3L << 0);
|
|
SGPIO_REG(SGPIO_SLICE_A) = 0xCAFEBABE; // Primary output data register
|
|
SGPIO_REG_SS(SGPIO_SLICE_A) = 0xDEADBEEF; // Shadow output data register
|
|
|
|
// Start SGPIO operation by enabling slice clocks.
|
|
SGPIO_CTRL_ENABLE = (1L << SGPIO_SLICE_A);
|
|
|
|
volatile uint32_t buffer[4096];
|
|
uint32_t i = 0;
|
|
int16_t magsq;
|
|
int8_t sigi, sigq;
|
|
|
|
// Enable codec data stream.
|
|
SGPIO_GPIO_OUTREG &= ~(1L << 10);
|
|
|
|
gpio_set(PORT_LED1_3, (PIN_LED2)); /* LED2 on */
|
|
while(true) {
|
|
while(SGPIO_STATUS_1 == 0);
|
|
gpio_set(PORT_LED1_3, (PIN_LED1)); /* LED1 on */
|
|
SGPIO_CLR_STATUS_1 = 1;
|
|
buffer[i & 4095] = SGPIO_REG_SS(SGPIO_SLICE_A);
|
|
|
|
/* find the magnitude squared */
|
|
sigi = (buffer[i & 4095] & 0xff) - 0x80;
|
|
sigq = ((buffer[i & 4095] >> 8) & 0xff) - 0x80;
|
|
magsq = sigi * sigq;
|
|
if ((uint16_t)magsq & 0x8000) {
|
|
magsq ^= 0xffff;
|
|
magsq++;
|
|
}
|
|
|
|
/* illuminate LED3 only when magsq exceeds threshold */
|
|
if (magsq > 0x3c00)
|
|
gpio_set(PORT_LED1_3, (PIN_LED3)); /* LED3 on */
|
|
else
|
|
gpio_clear(PORT_LED1_3, (PIN_LED3)); /* LED3 off */
|
|
i++;
|
|
}
|
|
}
|
|
|
|
int main(void) {
|
|
|
|
const uint32_t freq = 2483000000U;
|
|
|
|
pin_setup();
|
|
enable_1v8_power();
|
|
cpu_clock_init();
|
|
|
|
CGU_BASE_PERIPH_CLK = (CGU_BASE_CLK_AUTOBLOCK
|
|
| (CGU_SRC_PLL1 << CGU_BASE_CLK_SEL_SHIFT));
|
|
|
|
CGU_BASE_APB1_CLK = (CGU_BASE_CLK_AUTOBLOCK
|
|
| (CGU_SRC_PLL1 << CGU_BASE_CLK_SEL_SHIFT));
|
|
|
|
ssp1_init();
|
|
|
|
ssp1_set_mode_max2837();
|
|
max2837_setup();
|
|
max2837_set_frequency(freq);
|
|
max2837_start();
|
|
max2837_rx();
|
|
|
|
ssp1_set_mode_max5864();
|
|
max5864_xcvr();
|
|
configure_sgpio_test_rx();
|
|
|
|
while (1) {
|
|
|
|
}
|
|
|
|
return 0;
|
|
}
|