47 lines
1.3 KiB
Plaintext
47 lines
1.3 KiB
Plaintext
The primary firmware source code for USB HackRF devices is hackrf_usb. Most of
|
|
the other directories contain firmware source code for test and development.
|
|
The common directory contains source code shared by multiple HackRF firmware
|
|
projects. The cpld directory contains HDL source for the CPLD.
|
|
|
|
|
|
The firmware is set up for compilation with the GCC toolchain available here:
|
|
|
|
https://code.launchpad.net/gcc-arm-embedded
|
|
|
|
Required dependency:
|
|
|
|
https://github.com/mossmann/libopencm3
|
|
|
|
If you are using git, the preferred way to install libopencm3 is to use the
|
|
submodule:
|
|
|
|
$ cd ..
|
|
$ git submodule init
|
|
$ git submodule update
|
|
$ cd firmware/libopencm3
|
|
$ make
|
|
|
|
|
|
To build and install a standard firmware image for HackRF One:
|
|
|
|
$ cd hackrf_usb
|
|
$ make -e BOARD=HACKRF_ONE
|
|
$ hackrf_spiflash -w hackrf_usb_rom_to_ram.bin
|
|
|
|
If you have a Jawbreaker, use BOARD=JAWBREAKER instead.
|
|
|
|
|
|
For loading firmware into RAM with DFU you will also need:
|
|
|
|
git://git.openezx.org/dfu-util.git
|
|
|
|
To start up HackRF One in DFU mode, hold down the DFU button while powering it
|
|
on or while pressing and releasing the RESET button. Release the DFU button
|
|
after the 3V3 LED illuminates.
|
|
|
|
With dfu-util and dfu-suffix (from the dfu-util package) installed and with the
|
|
HackRF operating in DFU mode, you can build firmware for RAM and load it with:
|
|
|
|
$ cd hackrf_usb
|
|
$ make -e BOARD=HACKRF_ONE RUN_FROM=RAM program
|