Sojus07/hackrf
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
hackrf/firmware/common/max2837.c
Jared Boone 4f3cae2e41 MAX2837: Extract hardware/bus dependent stuff into separate layer. 
Conflicts:
	firmware/CMakeLists.txt
	firmware/hackrf_usb/Makefile
	firmware/mixertx/Makefile
	firmware/sgpio/CMakeLists.txt
	firmware/simpletx/Makefile
	firmware/spiflash/CMakeLists.txt
	firmware/startup/Makefile
	firmware/startup_systick/Makefile
	firmware/startup_systick_perfo/Makefile
2014-11-10 16:33:00 -08:00

401 lines
8.8 KiB
C
Raw Blame History

/*
* Copyright 2012 Will Code? (TODO: Proper attribution)
* Copyright 2014 Jared Boone <jared@sharebrained.com>
*
* This file is part of HackRF.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, Inc., 51 Franklin Street,
* Boston, MA 02110-1301, USA.
*/
/*
* 'gcc -DTEST -DDEBUG -O2 -o test max2837.c' prints out what test
* program would do if it had a real spi library
*
* 'gcc -DTEST -DBUS_PIRATE -O2 -o test max2837.c' prints out bus
* pirate commands to do the same thing.
*/
#include <stdint.h>
#include <string.h>
#include "max2837.h"
#include "max2837_drv.h"
#include "max2837_regs.def" // private register def macros
#if (defined DEBUG || defined BUS_PIRATE)
#include <stdio.h>
#define LOG printf
#else
#define LOG(x,...)
#include "hackrf_core.h"
#endif
/* Default register values. */
static uint16_t max2837_regs_default[MAX2837_NUM_REGS] = {
0x150, /* 0 */
0x002, /* 1 */
0x1f4, /* 2 */
0x1b9, /* 3 */
0x00a, /* 4 */
0x080, /* 5 */
0x006, /* 6 */
0x000, /* 7 */
0x080, /* 8 */
0x018, /* 9 */
0x058, /* 10 */
0x016, /* 11 */
0x24f, /* 12 */
0x150, /* 13 */
0x1c5, /* 14 */
0x081, /* 15 */
0x01c, /* 16 */
0x155, /* 17 */
0x155, /* 18 */
0x153, /* 19 */
0x241, /* 20 */
/*
* Charge Pump Common Mode Enable bit (0) of register 21 must be set or TX
* does not work. Page 1 of the SPI doc says not to set it (0x02c), but
* page 21 says it should be set by default (0x02d).
*/
0x02d, /* 21 */
0x1a9, /* 22 */
0x24f, /* 23 */
0x180, /* 24 */
0x100, /* 25 */
0x3ca, /* 26 */
0x3e3, /* 27 */
0x0c0, /* 28 */
0x3f0, /* 29 */
0x080, /* 30 */
0x000 }; /* 31 */
uint16_t max2837_regs[MAX2837_NUM_REGS];
/* Mark all regsisters dirty so all will be written at init. */
uint32_t max2837_regs_dirty = 0xffffffff;
/* Set up all registers according to defaults specified in docs. */
void max2837_init(void)
{
LOG("# max2837_init\n");
memcpy(max2837_regs, max2837_regs_default, sizeof(max2837_regs));
max2837_regs_dirty = 0xffffffff;
/* Write default register values to chip. */
max2837_regs_commit();
}
/*
* Set up pins for GPIO and SPI control, configure SSP peripheral for SPI, and
* set our own default register configuration.
*/
void max2837_setup(void)
{
LOG("# max2837_setup\n");
max2837_pin_config();
max2837_init();
LOG("# max2837_init done\n");
/* Use SPI control instead of B1-B7 pins for gain settings. */
set_MAX2837_TXVGA_GAIN_SPI_EN(1);
set_MAX2837_TXVGA_GAIN_MSB_SPI_EN(1);
//set_MAX2837_TXVGA_GAIN(0x3f); /* maximum attenuation */
set_MAX2837_TXVGA_GAIN(0x00); /* minimum attenuation */
set_MAX2837_VGAMUX_enable(1);
set_MAX2837_VGA_EN(1);
set_MAX2837_HPC_RXGAIN_EN(0);
set_MAX2837_HPC_STOP(MAX2837_STOP_1K);
set_MAX2837_LNAgain_SPI_EN(1);
set_MAX2837_LNAgain(MAX2837_LNAgain_MAX); /* maximum gain */
set_MAX2837_VGAgain_SPI_EN(1);
set_MAX2837_VGA(0x18); /* reasonable gain for noisy 2.4GHz environment */
/* maximum rx output common-mode voltage */
set_MAX2837_BUFF_VCM(MAX2837_BUFF_VCM_1_25);
/* configure baseband filter for 8 MHz TX */
set_MAX2837_LPF_EN(1);
set_MAX2837_ModeCtrl(MAX2837_ModeCtrl_RxLPF);
set_MAX2837_FT(MAX2837_FT_5M);
max2837_regs_commit();
}
uint16_t max2837_reg_read(uint8_t r)
{
if ((max2837_regs_dirty >> r) & 0x1) {
max2837_regs[r] = max2837_spi_read(r);
};
return max2837_regs[r];
}
void max2837_reg_write(uint8_t r, uint16_t v)
{
max2837_regs[r] = v;
max2837_spi_write(r, v);
MAX2837_REG_SET_CLEAN(r);
}
static inline void max2837_reg_commit(uint8_t r)
{
max2837_reg_write(r,max2837_regs[r]);
}
void max2837_regs_commit(void)
{
int r;
for(r = 0; r < MAX2837_NUM_REGS; r++) {
if ((max2837_regs_dirty >> r) & 0x1) {
max2837_reg_commit(r);
}
}
}
void max2837_set_mode(const max2837_mode_t new_mode) {
switch(new_mode) {
case MAX2837_MODE_SHUTDOWN:
max2837_mode_shutdown();
break;
case MAX2837_MODE_STANDBY:
max2837_mode_standby();
break;
case MAX2837_MODE_TX:
max2837_mode_tx();
break;
case MAX2837_MODE_RX:
max2837_mode_rx();
break;
default:
break;
}
}
void max2837_start(void)
{
LOG("# max2837_start\n");
set_MAX2837_EN_SPI(1);
max2837_regs_commit();
#if !defined TEST
max2837_mode_standby();
#endif
}
void max2837_tx(void)
{
LOG("# max2837_tx\n");
#if !defined TEST
set_MAX2837_ModeCtrl(MAX2837_ModeCtrl_TxLPF);
max2837_regs_commit();
max2837_mode_tx();
#endif
}
void max2837_rx(void)
{
LOG("# max2837_rx\n");
set_MAX2837_ModeCtrl(MAX2837_ModeCtrl_RxLPF);
max2837_regs_commit();
#if !defined TEST
max2837_mode_rx();
#endif
}
void max2837_stop(void)
{
LOG("# max2837_stop\n");
set_MAX2837_EN_SPI(0);
max2837_regs_commit();
#if !defined TEST
max2837_mode_shutdown();
#endif
}
void max2837_set_frequency(uint32_t freq)
{
uint8_t band;
uint8_t lna_band;
uint32_t div_frac;
uint32_t div_int;
uint32_t div_rem;
uint32_t div_cmp;
int i;
/* Select band. Allow tuning outside specified bands. */
if (freq < 2400000000U) {
band = MAX2837_LOGEN_BSW_2_3;
lna_band = MAX2837_LNAband_2_4;
}
else if (freq < 2500000000U) {
band = MAX2837_LOGEN_BSW_2_4;
lna_band = MAX2837_LNAband_2_4;
}
else if (freq < 2600000000U) {
band = MAX2837_LOGEN_BSW_2_5;
lna_band = MAX2837_LNAband_2_6;
}
else {
band = MAX2837_LOGEN_BSW_2_6;
lna_band = MAX2837_LNAband_2_6;
}
LOG("# max2837_set_frequency %ld, band %d, lna band %d\n",
freq, band, lna_band);
/* ASSUME 40MHz PLL. Ratio = F*(4/3)/40,000,000 = F/30,000,000 */
div_int = freq / 30000000;
div_rem = freq % 30000000;
div_frac = 0;
div_cmp = 30000000;
for( i = 0; i < 20; i++) {
div_frac <<= 1;
div_cmp >>= 1;
if (div_rem > div_cmp) {
div_frac |= 0x1;
div_rem -= div_cmp;
}
}
LOG("# int %ld, frac %ld\n", div_int, div_frac);
/* Band settings */
set_MAX2837_LOGEN_BSW(band);
set_MAX2837_LNAband(lna_band);
/* Write order matters here, so commit INT and FRAC_HI before
* committing FRAC_LO, which is the trigger for VCO
* auto-select. TODO - it's cleaner this way, but it would be
* faster to explicitly commit the registers explicitly so the
* dirty bits aren't scanned twice. */
set_MAX2837_SYN_INT(div_int);
set_MAX2837_SYN_FRAC_HI((div_frac >> 10) & 0x3ff);
max2837_regs_commit();
set_MAX2837_SYN_FRAC_LO(div_frac & 0x3ff);
max2837_regs_commit();
}
typedef struct {
uint32_t bandwidth_hz;
uint32_t ft;
} max2837_ft_t;
static const max2837_ft_t max2837_ft[] = {
{ 1750000, MAX2837_FT_1_75M },
{ 2500000, MAX2837_FT_2_5M },
{ 3500000, MAX2837_FT_3_5M },
{ 5000000, MAX2837_FT_5M },
{ 5500000, MAX2837_FT_5_5M },
{ 6000000, MAX2837_FT_6M },
{ 7000000, MAX2837_FT_7M },
{ 8000000, MAX2837_FT_8M },
{ 9000000, MAX2837_FT_9M },
{ 10000000, MAX2837_FT_10M },
{ 12000000, MAX2837_FT_12M },
{ 14000000, MAX2837_FT_14M },
{ 15000000, MAX2837_FT_15M },
{ 20000000, MAX2837_FT_20M },
{ 24000000, MAX2837_FT_24M },
{ 28000000, MAX2837_FT_28M },
{ 0, 0 },
};
bool max2837_set_lpf_bandwidth(const uint32_t bandwidth_hz) {
const max2837_ft_t* p = max2837_ft;
while( p->bandwidth_hz != 0 ) {
if( p->bandwidth_hz >= bandwidth_hz ) {
break;
}
p++;
}
if( p->bandwidth_hz != 0 ) {
set_MAX2837_FT(p->ft);
max2837_regs_commit();
return true;
} else {
return false;
}
}
bool max2837_set_lna_gain(const uint32_t gain_db) {
uint16_t val;
switch(gain_db){
case 40:
val = MAX2837_LNAgain_MAX;
break;
case 32:
val = MAX2837_LNAgain_M8;
break;
case 24:
val = MAX2837_LNAgain_M16;
break;
case 16:
val = MAX2837_LNAgain_M24;
break;
case 8:
val = MAX2837_LNAgain_M32;
break;
case 0:
val = MAX2837_LNAgain_M40;
break;
default:
return false;
}
set_MAX2837_LNAgain(val);
max2837_reg_commit(1);
return true;
}
bool max2837_set_vga_gain(const uint32_t gain_db) {
if( (gain_db & 0x1) || gain_db > 62)/* 0b11111*2 */
return false;
set_MAX2837_VGA( 31-(gain_db >> 1) );
max2837_reg_commit(5);
return true;
}
bool max2837_set_txvga_gain(const uint32_t gain_db) {
uint16_t val=0;
if(gain_db <16){
val = 31-gain_db;
val |= (1 << 5); // bit6: 16db
} else{
val = 31-(gain_db-16);
}
set_MAX2837_TXVGA_GAIN(val);
max2837_reg_commit(29);
return true;
}
#ifdef TEST
int main(int ac, char **av)
{
max2837_setup();
max2837_set_frequency(2441000000);
max2837_start();
max2837_tx();
max2837_stop();
}
#endif //TEST
Reference in New Issue View Git Blame Copy Permalink