Sojus07/hackrf
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
hackrf/firmware/common
History
Martin Ling a66492b8b7 rom_iap: Clean up comments and realign with spaces.
2022-08-03 23:03:15 +01:00
..
rad1o
rad1o: apply Linux kernel style clang-format
2022-01-10 23:42:52 +01:00
xapp058
Fix include paths
2015-07-22 22:56:17 +02:00
bitband.c
Fix-ups to copyrights -- missing e-mail address and inconsistent formatting.
2012-10-06 19:14:55 -07:00
bitband.h
Fix-ups to copyrights -- missing e-mail address and inconsistent formatting.
2012-10-06 19:14:55 -07:00
configure_file.cmake
Fix automatic rebuilding of M0 code
2021-11-10 11:31:42 +00:00
cpld_jtag.c
PortaPack: Add HackRF One gates for PortaPack JTAG and OperaCake code.
2019-03-02 20:43:19 -08:00
cpld_jtag.h
PortaPack: Add HackRF One gates for PortaPack JTAG and OperaCake code.
2019-03-02 20:43:19 -08:00
cpld_xc2c.c
CPLD: Output row address table to C file, use it in program/verify code.
2019-03-09 16:35:10 -08:00
cpld_xc2c.h
CPLD: Output row address table to C file, use it in program/verify code.
2019-03-09 16:35:10 -08:00
crc.c
USB: initial CPLD checksum API support.
2019-01-31 21:19:21 +00:00
crc.h
USB: initial CPLD checksum API support.
2019-01-31 21:19:21 +00:00
fault_handler.c
Add GCC "used" attribute to prevent hard_fault_handler_c() from being removed. It trips up -flto.
2014-08-11 16:07:59 -07:00
fault_handler.h
Added fault handler header file, where I've defined the Cortex-M3/M4 SCB using a struct instead of a slew of #defines. This deviates from the libopencm3 method, but is superior in other ways. So, there you go. It's not in libopencm3, it's here.
2012-10-10 13:36:10 -07:00
gpdma.c
Add GPDMA LLI functions to create a loop or one-shot chain of LLIs.
2013-12-08 18:18:22 -08:00
gpdma.h
Add GPDMA LLI functions to create a loop or one-shot chain of LLIs.
2013-12-08 18:18:22 -08:00
gpio_lpc.c
Use new GPIO API to abstract GPIO in various drivers.
2014-11-15 16:26:59 -08:00
gpio_lpc.h
Use new GPIO API to abstract GPIO in various drivers.
2014-11-15 16:26:59 -08:00
gpio.h
Use new GPIO API to abstract GPIO in various drivers.
2014-11-15 16:26:59 -08:00
hackrf_core.c
Realign GPIO assignments with spaces rather than tabs.
2022-08-03 23:03:15 +01:00
hackrf_core.h
Merge pull request #756 from mossmann/spi-names
2020-07-26 07:53:43 -06:00
hackrf_ui.c
rad1o: Don't update the UI during sweeps
2022-01-10 23:26:19 +01:00
hackrf_ui.h
rad1o: Don't update the UI during sweeps
2022-01-10 23:26:19 +01:00
i2c_bus.c
adopt OSHWA convention for SPI signal names
2020-07-03 16:37:15 -06:00
i2c_bus.h
adopt OSHWA convention for SPI signal names
2020-07-03 16:37:15 -06:00
i2c_lpc.c
adopt OSHWA convention for SPI signal names
2020-07-03 16:37:15 -06:00
i2c_lpc.h
adopt OSHWA convention for SPI signal names
2020-07-03 16:37:15 -06:00
LPC43xx_M0_memory.ld
Break ldscripts into smaller pieces that can be shared.
2014-01-11 17:38:27 -08:00
LPC43xx_M4_M0_image_from_text.ld
Copy M0 image directly from ROM, instead of shadow region.
2021-10-06 18:40:34 +01:00
LPC43xx_M4_memory.ld
Move M0 offset and tx variables into a state struct.
2022-01-03 18:47:58 +00:00
LPC4320_M4_memory.ld
Break ldscripts into smaller pieces that can be shared.
2014-01-11 17:38:27 -08:00
LPC4330_M4_memory.ld
Reinstate LPC4330 linker script
2017-02-17 07:49:16 -07:00
m0_bin.s.cmake
Fix automatic rebuilding of M0 code
2021-11-10 11:31:42 +00:00
m0_sleep.c
Add default M0 code that just loops forever, if a project doesn't specify any SRC_M0_[CS] files.
2013-11-20 15:11:54 -08:00
max2837_regs.def
MAX2837: De-singleton the driver.
2014-11-10 16:37:34 -08:00
max2837_target.c
adopt OSHWA convention for SPI signal names
2020-07-03 16:37:15 -06:00
max2837_target.h
Use new GPIO API to abstract GPIO in various drivers.
2014-11-15 16:26:59 -08:00
max2837.c
Merge remote-tracking branch 'mossmann/master' into rad1o
2017-01-26 00:21:58 +01:00
max2837.h
Remove Jellybean support from firmware
2017-02-14 21:33:52 -07:00
max2871_regs.c
feat(max2871.c): POC
2015-06-07 17:07:36 +02:00
max2871_regs.h
refact(mixer): Basic mixer abstraction
2017-01-26 00:31:43 +01:00
max2871.c
chore(rad1o): White space fixes and cleanup
2017-02-03 19:27:19 +01:00
max2871.h
feat(mixer): Full MAX2871 integration for rad1o
2017-01-27 21:41:24 +01:00
max5864_target.c
adopt OSHWA convention for SPI signal names
2020-07-03 16:37:15 -06:00
max5864_target.h
Use new GPIO API to abstract GPIO in various drivers.
2014-11-15 16:26:59 -08:00
max5864.c
SPI: Rename spi_t to spi_bus_t to match I2C naming.
2014-11-13 10:16:39 -08:00
max5864.h
SPI: Rename spi_t to spi_bus_t to match I2C naming.
2014-11-13 10:16:39 -08:00
mixer.c
Realign GPIO assignments with spaces rather than tabs.
2022-08-03 23:03:15 +01:00
mixer.h
feat(mixer): Full MAX2871 integration for rad1o
2017-01-27 21:41:24 +01:00
operacake_sctimer.c
operacake: add support for port switching using SCTimer
2021-10-14 14:36:18 +01:00
operacake_sctimer.h
operacake: add support for port switching using SCTimer
2021-10-14 14:36:18 +01:00
operacake.c
default to the last specified frequency range
2021-12-12 13:29:25 -07:00
operacake.h
clear frequency ranges before adding new ones
2021-12-12 13:25:44 -07:00
portapack.c
rf_path: Realign scu_pinmux calls.
2022-08-03 23:03:15 +01:00
portapack.h
PortaPack: Add check for PortaPack clock reference, use if present.
2019-03-20 13:27:20 -07:00
README
started firmware directory with some basic stuff
2012-05-21 11:33:46 -06:00
rf_path.c
rf_path: Realign scu_pinmux calls.
2022-08-03 23:03:15 +01:00
rf_path.h
fix(rf_path): Port rad1o pin config
2017-01-27 20:45:49 +01:00
rffc5071_regs.def
RFFC507x: De-singleton the driver code.
2014-11-10 16:42:08 -08:00
rffc5071_spi.c
Speed up RFFC5072 comms by 50%!
2016-12-27 21:08:12 +00:00
rffc5071_spi.h
Use new GPIO API to abstract GPIO in various drivers.
2014-11-15 16:26:59 -08:00
rffc5071.c
Change RFFC5071 clock from 40MHz to 50MHz and invert it
2017-02-21 17:56:37 -07:00
rffc5071.h
fix(common, hackf_usb): Make it compile for rad10
2015-06-06 18:49:09 +02:00
rom_iap.c
SPI: Rename spi_t to spi_bus_t to match I2C naming.
2014-11-13 10:16:39 -08:00
rom_iap.h
rom_iap: Clean up comments and realign with spaces.
2022-08-03 23:03:15 +01:00
sct.h
operacake: add support for port switching using SCTimer
2021-10-14 14:36:18 +01:00
sgpio.c
operacake: add support for port switching using SCTimer
2021-10-14 14:36:18 +01:00
sgpio.h
sgpio_cpld_stream_rx_set_decimation() is no longer available
2021-11-08 16:45:11 +03:00
si5351c.c
keep clkout state over general clock reconfiguration
2022-01-26 18:36:09 +01:00
si5351c.h
Si5351C: Extract best block source function into hackrf_core.
2019-03-20 11:16:44 -07:00
spi_bus.c
SPI: Rename spi_t to spi_bus_t to match I2C naming.
2014-11-13 10:16:39 -08:00
spi_bus.h
SPI: Rename spi_t to spi_bus_t to match I2C naming.
2014-11-13 10:16:39 -08:00
spi_ssp.c
Use new GPIO API to abstract GPIO in various drivers.
2014-11-15 16:26:59 -08:00
spi_ssp.h
Use new GPIO API to abstract GPIO in various drivers.
2014-11-15 16:26:59 -08:00
streaming.c
Use the M0 to collect SGPIO samples
2020-01-20 14:22:30 +00:00
streaming.h
Use new GPIO API to abstract GPIO in various drivers.
2014-11-15 16:26:59 -08:00
tuning.c
Rename hackrf-ui.[ch]
2020-01-22 14:20:23 +00:00
tuning.h
replaced set_freq_if() with set_freq_explicit() and implemented explicit tuning option in hackrf_transfer
2014-03-13 16:06:51 -06:00
ui_portapack.c
rad1o: Don't update the UI during sweeps
2022-01-10 23:26:19 +01:00
ui_portapack.h
Rename hackrf-ui.[ch]
2020-01-22 14:20:23 +00:00
ui_rad1o.c
rad1o: apply Linux kernel style clang-format
2022-01-10 23:42:52 +01:00
ui_rad1o.h
rad1o: apply Linux kernel style clang-format
2022-01-10 23:42:52 +01:00
usb_queue.c
Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.
2013-09-17 15:10:46 -07:00
usb_queue.h
Broke some application-specific USB code into separate files within hackrf_usb/. Hoping I can use them as necessary in other projects, or push them into a library eventually.
2013-09-19 19:51:32 -07:00
usb_request.c
Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.
2013-09-17 15:10:46 -07:00
usb_request.h
Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.
2013-09-17 15:10:46 -07:00
usb_standard_request.c
Schedule ACK after CLEAR_FEATURE / ENDPOINT_HALT request.
2022-03-30 00:34:32 +01:00
usb_standard_request.h
Add Windows Compatible ID descriptors
2016-07-17 22:20:32 +01:00
usb_type.h
Implement USB CLEAR_FEATURE request for ENDPOINT_HALT.
2022-03-29 14:11:00 +01:00
usb.c
Reset endpoint specified in request, not the one it arrived on.
2022-03-29 23:40:08 +01:00
usb.h
Reset endpoint specified in request, not the one it arrived on.
2022-03-29 23:40:08 +01:00
w25q80bv_target.c
adopt OSHWA convention for SPI signal names
2020-07-03 16:37:15 -06:00
w25q80bv_target.h
Use new GPIO API to abstract GPIO in various drivers.
2014-11-15 16:26:59 -08:00
w25q80bv.c
adopt OSHWA convention for SPI signal names
2020-07-03 16:37:15 -06:00
w25q80bv.h
SPI Flash: add function to clear SPI flash status register
2017-11-06 10:42:19 -07:00

README 

This directory contains things shared by multiple HackRF firmware
implementations.