Jared Boone 2022cc6351 Only perform W25Q80BV setup once, at startup. ...

hackrf_usb firmware does not run from SPI flash once the ROM bootloader is done. Simplify assumptions by initializing SPI flash once, early. Do not initialize it every 256 bytes that are read from or written to the device.

2015-08-28 13:03:40 -07:00

..

CMakeLists.txt

Create separate CMake toolchain file. Add references to toolchain file in each firmware CMakeLists.txt. I suspect this can be simpler still, just not sure how, yet...

2014-08-11 16:43:58 -07:00

hackrf_usb.c

Only perform W25Q80BV setup once, at startup.

2015-08-28 13:03:40 -07:00

sgpio_isr.c

Remove sample-pair reordering in SGPIO interrupt -- CPLD fixes address this.

2013-11-16 13:32:41 -08:00

sgpio_isr.h

Move SGPIO ISRs to separate .c/.h files.

2013-09-08 15:10:19 -07:00

usb_api_board_info.c

Extracted USB API for board information into separate files.

2013-09-19 22:45:38 -07:00

usb_api_board_info.h

Extracted USB API for board information into separate files.

2013-09-19 22:45:38 -07:00

usb_api_cpld.c

Quiet warning about unused args in cpld_buffer_refilled().

2014-11-10 11:11:49 -08:00

usb_api_cpld.h

Move USB API for CPLD management into separate files.

2013-09-19 19:52:14 -07:00

usb_api_register.c

Moved USB API for manipulating RF chip registers into separate files.

2013-09-19 22:37:36 -07:00

usb_api_register.h

Moved USB API for manipulating RF chip registers into separate files.

2013-09-19 22:37:36 -07:00

usb_api_spiflash.c

Only perform W25Q80BV setup once, at startup.

2015-08-28 13:03:40 -07:00

usb_api_spiflash.h

Extracted USB API for SPI flash erase/write/read into separate files.

2013-09-19 22:29:49 -07:00

usb_api_transceiver.c

replaced set_freq_if() with set_freq_explicit() and implemented explicit tuning option in hackrf_transfer

2014-03-13 16:06:51 -06:00

usb_api_transceiver.h

replaced set_freq_if() with set_freq_explicit() and implemented explicit tuning option in hackrf_transfer

2014-03-13 16:06:51 -06:00

usb_bulk_buffer.c

Remove usb_bulk_buffer declaration, it was causing duplicate buffers to exist in RAM. Allow ldscript to determine symbol's address by making buffer "extern" only.

2014-02-14 10:48:38 -08:00

usb_bulk_buffer.h

Remove usb_bulk_buffer declaration, it was causing duplicate buffers to exist in RAM. Allow ldscript to determine symbol's address by making buffer "extern" only.

2014-02-14 10:48:38 -08:00

usb_descriptor.c

Create a #define/constant for the usb_descriptor_string_serial_number length.

2015-02-24 01:13:06 +02:00

usb_descriptor.h

Create a #define/constant for the usb_descriptor_string_serial_number length.

2015-02-24 01:13:06 +02:00

usb_device.c

Broke some application-specific USB code into separate files within hackrf_usb/. Hoping I can use them as necessary in other projects, or push them into a library eventually.

2013-09-19 19:51:32 -07:00

usb_device.h

Broke some application-specific USB code into separate files within hackrf_usb/. Hoping I can use them as necessary in other projects, or push them into a library eventually.

2013-09-19 19:51:32 -07:00

usb_endpoint.c

Change USB bulk endpoint for baseband data to have only one queue item. Since there are only two baseband buffers, and one is transferring with the codec and the other with USB, enqueueing more than one buffer at a time would result in transferring an incomplete buffer.

2013-12-31 20:34:01 -08:00

usb_endpoint.h

Broke some application-specific USB code into separate files within hackrf_usb/. Hoping I can use them as necessary in other projects, or push them into a library eventually.

2013-09-19 19:51:32 -07:00