Jared Boone
|
d55bd529e2
|
RFFC507x: De-singleton the driver code.
|
2014-11-10 16:42:08 -08:00 |
|
Jared Boone
|
453f622b74
|
MAX2837: De-singleton the driver.
Conflicts:
firmware/common/hackrf_core.c
firmware/common/hackrf_core.h
|
2014-11-10 16:37:34 -08:00 |
|
Jared Boone
|
572fe32393
|
Add #include to address "sgpio_cpld_stream_rx_set_q_invert" warning.
|
2014-11-10 11:10:18 -08:00 |
|
Michael Ossmann
|
c8742572db
|
high-side injection for tuning below 2150 MHz (known bug: baseband spectrum is inverted on TX)
|
2014-08-15 07:49:13 -06:00 |
|
Jared Boone
|
2abdebfb2a
|
Add parentheses to silence ambiguous expression warning.
|
2014-08-11 16:08:08 -07:00 |
|
Michael Ossmann
|
d4a5c2290b
|
replaced set_freq_if() with set_freq_explicit() and implemented explicit tuning option in hackrf_transfer
|
2014-03-13 16:06:51 -06:00 |
|
Michael Ossmann
|
630a78aabe
|
stale comment
|
2014-03-12 16:05:53 -06:00 |
|
Michael Ossmann
|
f5be40fe5b
|
fixed tuning bug
|
2014-03-12 12:40:45 -06:00 |
|
Michael Ossmann
|
d3bba0dc89
|
reverted to low-side injection until/unless inverted spectrum is resolved
|
2014-03-03 18:28:23 -07:00 |
|
Michael Ossmann
|
a9592ea87e
|
fixed bug with high-side injection tuning
|
2014-03-03 18:24:16 -07:00 |
|
Michael Ossmann
|
f74e9e9dc1
|
divided tuning frequencies above 2750 MHz into three ranges with graduated IF for spur avoidance
|
2014-03-03 16:30:48 -07:00 |
|
Michael Ossmann
|
768323e28f
|
removed check for too low tuning frequency now that we permit tuning down to 0 Hz
|
2014-03-03 14:13:56 -07:00 |
|
Michael Ossmann
|
cd9a1c1366
|
high-side injection and graduated IF for tuning from 0 to 2150 MHz
|
2014-03-03 14:08:38 -07:00 |
|
Michael Ossmann
|
d051c42e3a
|
increased maximum tuning frequency from 6800 MHz to 7250 MHz
|
2014-03-03 14:07:48 -07:00 |
|
Michael Ossmann
|
fbe4c481f2
|
reduced minimum tuning frequency from 5 MHz to 0 Hz
|
2014-03-03 12:21:28 -07:00 |
|
Michael Ossmann
|
dd6d192e13
|
increased allowed MAX2837 frequency range from 2300-2700 MHz to 2150-2750 MHz based on experimentation
|
2014-03-03 12:20:27 -07:00 |
|
Jared Boone
|
84d7263fa4
|
Widen frequency argument/return paths in RFFC5071 code.
|
2014-02-19 12:56:24 -08:00 |
|
Jared Boone
|
75e1dcd9cf
|
Don't update MAX2837 freq_cache unless set_freq() is successful.
|
2014-01-04 10:15:01 -08:00 |
|
Jared Boone
|
fc5ec03353
|
Adjust tuning API to use a single 64-bit integer for frequency in Hz, since the Cortex-M4F has good support for uint64_t.
|
2013-12-31 20:12:47 -08:00 |
|
Jared Boone
|
b4f883595f
|
Remove MAX2837_FREQ_NOMINAL_MHZ #define -- it must be updated now that IF is adjustable. So I pushed the calculation directly into the two places it was used.
|
2013-09-21 20:27:27 -07:00 |
|
Jared Boone
|
04e70483a2
|
Move RF path configuration to early in the tuning process -- before the MAX2837 is tuned.
|
2013-09-17 21:59:01 -07:00 |
|
Jared Boone
|
fe2a700f8f
|
Move files that have no application-specific bits (e.g. USB stack, tuning, and RF path APIs) to ../common/.
|
2013-09-17 15:10:46 -07:00 |
|