The firmware has the capability to dwell on each frequency for a
configurable duration in sweep mode, but the hackrf_sweep host tool did
not behave correctly when asked to use a non-default dwell time. The
option has never worked properly, and it is not a feature anyone seems
to want.
We previously attempted to adjust the output time stamp according to the
sample rate and placement of the samples within the USB transfer data,
but the end result was a fixed time offset with respect to the time of
USB transfer completion. We are using only those samples closest to the
end of the transfer, so it makes sense to simply use the time the USB
transfer ends and not try to correct that fixed offset.
It may be possible in the future to have a more accurate time stamp
generated in firmware, but I don't think it is worth complicating the
host code with minor time adjustments until and unless firmware-based
time stamps become available.
Now that addresses are in the range 0-7, this would previously output
"Operacakes found: 0" for the default board address. This is confusing
as it looks like it found no Opera Cakes.
* Report amplitude once per second during receive
* Added missing M_LN10 for Windoze, fixed short frame detection for RSSI
* Tweaks to math expressions
* Tweaks to math expressions
Sometimes, if a small frequency interval is scanned, the callback is
triggered even though we already have the number of sweeps we want, and
sweep_count gets increased, showing the wrong "Total sweeps".
hackrf_stop_rx() is handled in hackrf_close(), so there seems to be no need
to call it separately. Furthermore, if hackrf_stop() is called separately,
it causes hackrf_close() to take more than half a second longer.
HackRF One supports arbitrary sample rates from 2 Msps to 20 Msps. In
early development we had ideas about preferred sample rates that we no
longer consider valid.
The checksum calculation process was causing the CPLD configuration to reload from flash. With the new SRAM loading mechanism, flash contents may not be up to date, so the CPLD bitstream may regress to the point of not working or not working correctly. This commit is a short-term fix for mossmann/hackrf issue #609.
