From fc79b0ffb1ab4b5336e049cb3fc9e91ba2d978e8 Mon Sep 17 00:00:00 2001 From: dizcza Date: Sun, 5 Jun 2022 11:18:48 +0300 Subject: [PATCH] fixed firmware manual build docs --- firmware/README | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/firmware/README b/firmware/README index b4505694..54f14c12 100644 --- a/firmware/README +++ b/firmware/README @@ -31,6 +31,12 @@ $ hackrf_spiflash -w hackrf_usb.bin If you have a Jawbreaker, add -DBOARD=JAWBREAKER to the cmake command. If you have a rad1o, use -DBOARD=RAD1O instead. +If you get the "`arm-none-eabi-gcc` is not a full path and was not found in the PATH" +error during `cmake ..`, install the package with `sudo apt-get install gcc-arm-none-eabi`. + +If you get the "ModuleNotFoundError: No module named 'yaml'" error during `make`, +run `pip install pyyaml` to install the Python yaml pip package. + It is possible to use a USB Device Firmware Upgrade (DFU) method to load firmware into RAM. This is normally only required to recover a device that has had faulty firmware loaded, but it can also be useful for firmware developers.