Sojus07/hackrf
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

MAX2837: Remove test code.

Browse Source 
Hardware abstraction should make for easier test harnessing in the future.
This commit is contained in:
Jared Boone
2014-11-07 11:12:41 -08:00
parent 6668c2706b
commit e2c33aac88
2 changed files with 0 additions and 55 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

39
firmware/common/max2837.c
View File

@ -34,13 +34,7 @@
#include "max2837_drv.h"
#include "max2837_regs.def" // private register def macros
#if (defined DEBUG || defined BUS_PIRATE)
#include <stdio.h>
#define LOG printf
#else
#define LOG(x,...)
#include "hackrf_core.h"
#endif
/* Default register values. */
static const uint16_t max2837_regs_default[MAX2837_NUM_REGS] = {
@ -85,7 +79,6 @@ static const uint16_t max2837_regs_default[MAX2837_NUM_REGS] = {
/* Set up all registers according to defaults specified in docs. */
void max2837_init(max2837_driver_t* const drv)
{
LOG("# max2837_init\n");
memcpy(drv->regs, max2837_regs_default, sizeof(drv->regs));
drv->regs_dirty = 0xffffffff;
@ -99,11 +92,9 @@ void max2837_init(max2837_driver_t* const drv)
*/
void max2837_setup(max2837_driver_t* const drv)
{
LOG("# max2837_setup\n");
max2837_pin_config(drv);
max2837_init(drv);
LOG("# max2837_init done\n");
/* Use SPI control instead of B1-B7 pins for gain settings. */
set_MAX2837_TXVGA_GAIN_SPI_EN(drv, 1);
@ -185,45 +176,30 @@ void max2837_set_mode(max2837_driver_t* const drv, const max2837_mode_t new_mode
void max2837_start(max2837_driver_t* const drv)
{
LOG("# max2837_start\n");
set_MAX2837_EN_SPI(drv, 1);
max2837_regs_commit(drv);
#if !defined TEST
max2837_mode_standby(drv);
#endif
}
void max2837_tx(max2837_driver_t* const drv)
{
LOG("# max2837_tx\n");
#if !defined TEST
set_MAX2837_ModeCtrl(drv, MAX2837_ModeCtrl_TxLPF);
max2837_regs_commit(drv);
max2837_mode_tx(drv);
#endif
}
void max2837_rx(max2837_driver_t* const drv)
{
LOG("# max2837_rx\n");
set_MAX2837_ModeCtrl(drv, MAX2837_ModeCtrl_RxLPF);
max2837_regs_commit(drv);
#if !defined TEST
max2837_mode_rx(drv);
#endif
}
void max2837_stop(max2837_driver_t* const drv)
{
LOG("# max2837_stop\n");
set_MAX2837_EN_SPI(drv, 0);
max2837_regs_commit(drv);
#if !defined TEST
max2837_mode_shutdown(drv);
#endif
}
void max2837_set_frequency(max2837_driver_t* const drv, uint32_t freq)
@ -254,9 +230,6 @@ void max2837_set_frequency(max2837_driver_t* const drv, uint32_t freq)
lna_band = MAX2837_LNAband_2_6;
}
LOG("# max2837_set_frequency %ld, band %d, lna band %d\n",
freq, band, lna_band);
/* ASSUME 40MHz PLL. Ratio = F*(4/3)/40,000,000 = F/30,000,000 */
div_int = freq / 30000000;
div_rem = freq % 30000000;
@ -270,7 +243,6 @@ void max2837_set_frequency(max2837_driver_t* const drv, uint32_t freq)
div_rem -= div_cmp;
}
}
LOG("# int %ld, frac %ld\n", div_int, div_frac);
/* Band settings */
set_MAX2837_LOGEN_BSW(drv, band);
@ -382,14 +354,3 @@ bool max2837_set_txvga_gain(max2837_driver_t* const drv, const uint32_t gain_db)
max2837_reg_commit(drv, 29);
return true;
}
#ifdef TEST
int main(int ac, char **av)
{
max2837_setup(drv);
max2837_set_frequency(drv, 2441000000);
max2837_start(drv);
max2837_tx(drv);
max2837_stop(drv);
}
#endif //TEST

16
firmware/common/max2837_drv.c
View File

@ -22,19 +22,12 @@
#include "max2837_drv.h"
#if (defined DEBUG || defined BUS_PIRATE)
#include <stdio.h>
#define LOG printf
#else
#define LOG(x,...)
#include <libopencm3/lpc43xx/ssp.h>
#include <libopencm3/lpc43xx/scu.h>
#include <libopencm3/lpc43xx/gpio.h>
#include "hackrf_core.h"
#endif
void max2837_pin_config(max2837_driver_t* const drv) {
#if !defined TEST
/* Configure XCVR_CTL GPIO pins. */
#ifdef JELLYBEAN
scu_pinmux(SCU_XCVR_RXHP, SCU_GPIO_FAST);
@ -78,7 +71,6 @@ void max2837_pin_config(max2837_driver_t* const drv) {
| PIN_XCVR_B7
);
#endif
#endif
}
void max2837_mode_shutdown(max2837_driver_t* const drv) {
@ -152,15 +144,7 @@ uint16_t max2837_spi_read(max2837_driver_t* const drv, uint8_t r) {
/* SPI register write */
void max2837_spi_write(max2837_driver_t* const drv, uint8_t r, uint16_t v) {
(void)drv;
#ifdef BUS_PIRATE
LOG("{0x%02x 0x%02x]\n", 0x00 | ((uint16_t)r<<2) | ((v>>8) & 0x3),
v & 0xff);
#elif DEBUG
LOG("0x%03x -> reg%d\n", v, r);
#else
gpio_clear(PORT_XCVR_CS, PIN_XCVR_CS);
ssp_transfer(SSP1_NUM, (uint16_t)((r << 10) | (v & 0x3ff)));
gpio_set(PORT_XCVR_CS, PIN_XCVR_CS);
#endif
}