diff --git a/firmware/common/hackrf_core.c b/firmware/common/hackrf_core.c
index d7c875be..9f2bb9bd 100644
--- a/firmware/common/hackrf_core.c
+++ b/firmware/common/hackrf_core.c
@@ -23,11 +23,10 @@
 
 #include "hackrf_core.h"
 #include "si5351c.h"
+#include "spi_ssp1.h"
 #include "max2837.h"
-#include "max2837_spi.h"
 #include "max2837_target.h"
 #include "max5864.h"
-#include "max5864_spi.h"
 #include "max5864_target.h"
 #include "rffc5071.h"
 #include "rffc5071_spi.h"
@@ -41,27 +40,53 @@
 
 #define WAIT_CPU_CLOCK_INIT_DELAY   (10000)
 
-spi_t max2837_spi = {
-	.init = max2837_spi_init,
-	.transfer = max2837_spi_transfer,
-	.transfer_gather = max2837_spi_transfer_gather,
+const ssp1_config_t ssp1_config_max2837 = {
+	/* FIXME speed up once everything is working reliably */
+	/*
+	// Freq About 0.0498MHz / 49.8KHz => Freq = PCLK / (CPSDVSR * [SCR+1]) with PCLK=PLL1=204MHz
+	const uint8_t serial_clock_rate = 32;
+	const uint8_t clock_prescale_rate = 128;
+	*/
+	// Freq About 4.857MHz => Freq = PCLK / (CPSDVSR * [SCR+1]) with PCLK=PLL1=204MHz
+	.data_bits = SSP_DATA_16BITS,
+	.serial_clock_rate = 21,
+	.clock_prescale_rate = 2,
+	.select = max2837_target_spi_select,
+	.unselect = max2837_target_spi_unselect,
+};
+
+const ssp1_config_t ssp1_config_max5864 = {
+	/* FIXME speed up once everything is working reliably */
+	/*
+	// Freq About 0.0498MHz / 49.8KHz => Freq = PCLK / (CPSDVSR * [SCR+1]) with PCLK=PLL1=204MHz
+	const uint8_t serial_clock_rate = 32;
+	const uint8_t clock_prescale_rate = 128;
+	*/
+	// Freq About 4.857MHz => Freq = PCLK / (CPSDVSR * [SCR+1]) with PCLK=PLL1=204MHz
+	.data_bits = SSP_DATA_8BITS,
+	.serial_clock_rate = 21,
+	.clock_prescale_rate = 2,
+	.select = max5864_target_spi_select,
+	.unselect = max5864_target_spi_unselect,
+};
+
+spi_t spi_ssp1 = {
+	.config = &ssp1_config_max2837,
+	.init = spi_ssp1_init,
+	.transfer = spi_ssp1_transfer,
+	.transfer_gather = spi_ssp1_transfer_gather,
 };
 
 max2837_driver_t max2837 = {
-	.spi = &max2837_spi,
-};
-
-spi_t max5864_spi = {
-	.init = max5864_spi_init,
-	.transfer = max5864_spi_transfer,
-	.transfer_gather = max5864_spi_transfer_gather,
+	.spi = &spi_ssp1,
 };
 
 max5864_driver_t max5864 = {
-	.spi = &max5864_spi,
+	.spi = &spi_ssp1,
 };
 
 spi_t rffc5071_spi = {
+	.config = NULL,
 	.init = rffc5071_spi_init,
 	.transfer = rffc5071_spi_transfer,
 	.transfer_gather = rffc5071_spi_transfer_gather,
@@ -542,12 +567,12 @@ void cpu_clock_pll1_max_speed(void)
 
 void ssp1_set_mode_max2837(void)
 {
-	spi_init(max2837.spi);
+	spi_init(max2837.spi, &ssp1_config_max2837);
 }
 
 void ssp1_set_mode_max5864(void)
 {
-	spi_init(max5864.spi);
+	spi_init(max5864.spi, &ssp1_config_max5864);
 }
 
 void pin_setup(void) {
diff --git a/firmware/common/hackrf_core.h b/firmware/common/hackrf_core.h
index f9f8a93b..daebe1b5 100644
--- a/firmware/common/hackrf_core.h
+++ b/firmware/common/hackrf_core.h
@@ -32,6 +32,8 @@ extern "C"
 #include <stdint.h>
 #include <stdbool.h>
 
+#include "spi_ssp1.h"
+
 #include "max2837.h"
 #include "max5864.h"
 #include "rffc5071.h"
@@ -353,6 +355,10 @@ typedef enum {
 } transceiver_mode_t;
 
 void delay(uint32_t duration);
+
+extern const ssp1_config_t ssp1_config_max2837;
+extern const ssp1_config_t ssp1_config_max5864;
+
 extern max2837_driver_t max2837;
 extern max5864_driver_t max5864;
 extern rffc5071_driver_t rffc5072;
diff --git a/firmware/common/max2837.c b/firmware/common/max2837.c
index fa3b9786..c667bbe3 100644
--- a/firmware/common/max2837.c
+++ b/firmware/common/max2837.c
@@ -79,7 +79,7 @@ static const uint16_t max2837_regs_default[MAX2837_NUM_REGS] = {
 /* Set up all registers according to defaults specified in docs. */
 static void max2837_init(max2837_driver_t* const drv)
 {
-	spi_init(drv->spi);
+	spi_init(drv->spi, &ssp1_config_max2837);
 	max2837_mode_shutdown(drv);
 	max2837_target_init(drv);
 
diff --git a/firmware/common/max2837_spi.c b/firmware/common/max2837_spi.c
deleted file mode 100644
index 911fbbf6..00000000
--- a/firmware/common/max2837_spi.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2012 Will Code? (TODO: Proper attribution)
- * Copyright (C) 2014 Jared Boone, ShareBrained Technology, Inc.
- *
- * This file is part of HackRF.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#include "max2837_spi.h"
-
-#include <libopencm3/lpc43xx/gpio.h>
-#include <libopencm3/lpc43xx/scu.h>
-#include <libopencm3/lpc43xx/ssp.h>
-
-#include "hackrf_core.h"
-
-void max2837_spi_init(spi_t* const spi) {
-	(void)spi;
-
-	/* FIXME speed up once everything is working reliably */
-	/*
-	// Freq About 0.0498MHz / 49.8KHz => Freq = PCLK / (CPSDVSR * [SCR+1]) with PCLK=PLL1=204MHz
-	const uint8_t serial_clock_rate = 32;
-	const uint8_t clock_prescale_rate = 128;
-	*/
-	// Freq About 4.857MHz => Freq = PCLK / (CPSDVSR * [SCR+1]) with PCLK=PLL1=204MHz
-	const uint8_t serial_clock_rate = 21;
-	const uint8_t clock_prescale_rate = 2;
-	
-	ssp_init(SSP1_NUM,
-		SSP_DATA_16BITS,
-		SSP_FRAME_SPI,
-		SSP_CPOL_0_CPHA_0,
-		serial_clock_rate,
-		clock_prescale_rate,
-		SSP_MODE_NORMAL,
-		SSP_MASTER,
-		SSP_SLAVE_OUT_ENABLE);
-
-	/* Configure SSP1 Peripheral (to be moved later in SSP driver) */
-	scu_pinmux(SCU_SSP1_MISO, (SCU_SSP_IO | SCU_CONF_FUNCTION5));
-	scu_pinmux(SCU_SSP1_MOSI, (SCU_SSP_IO | SCU_CONF_FUNCTION5));
-	scu_pinmux(SCU_SSP1_SCK,  (SCU_SSP_IO | SCU_CONF_FUNCTION1));
-}
-
-void max2837_spi_transfer_gather(spi_t* const spi, const spi_transfer_t* const transfers, const size_t count) {
-	(void)spi;
-
-	gpio_clear(PORT_XCVR_CS, PIN_XCVR_CS);
-	for(size_t i=0; i<count; i++) {
-		const size_t data_count = transfers[i].count;
-		uint16_t* const data = transfers[i].data;
-		for(size_t j=0; j<data_count; j++) {
-			data[j] = ssp_transfer(SSP1_NUM, data[j]);
-		}
-	}		
-	gpio_set(PORT_XCVR_CS, PIN_XCVR_CS);
-}
-
-void max2837_spi_transfer(spi_t* const spi, void* const data, const size_t count) {
-	const spi_transfer_t transfers[] = {
-		{ data, count },
-	};
-	max2837_spi_transfer_gather(spi, transfers, 1);
-}
diff --git a/firmware/common/max2837_spi.h b/firmware/common/max2837_spi.h
deleted file mode 100644
index b3de6db3..00000000
--- a/firmware/common/max2837_spi.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright 2012 Will Code? (TODO: Proper attribution)
- * Copyright (C) 2014 Jared Boone, ShareBrained Technology, Inc.
- *
- * This file is part of HackRF.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.  If not, write to
- * the Free Software Foundation, Inc., 51 Franklin Street,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef __MAX2837_SPI_H__
-#define __MAX2837_SPI_H__
-
-#include "stddef.h"
-
-#include "spi.h"
-
-void max2837_spi_init(spi_t* const spi);
-void max2837_spi_transfer(spi_t* const spi, void* const data, const size_t count);
-void max2837_spi_transfer_gather(spi_t* const spi, const spi_transfer_t* const transfers, const size_t count);
-
-#endif/*__MAX2837_SPI_H__*/
diff --git a/firmware/common/max2837_target.c b/firmware/common/max2837_target.c
index b50fc02d..a2c21e72 100644
--- a/firmware/common/max2837_target.c
+++ b/firmware/common/max2837_target.c
@@ -77,6 +77,16 @@ void max2837_target_init(max2837_driver_t* const drv) {
 #endif
 }
 
+void max2837_target_spi_select(spi_t* const spi) {
+	(void)spi;
+	gpio_clear(PORT_XCVR_CS, PIN_XCVR_CS);
+}
+
+void max2837_target_spi_unselect(spi_t* const spi) {
+	(void)spi;
+	gpio_set(PORT_XCVR_CS, PIN_XCVR_CS);
+}
+
 void max2837_mode_shutdown(max2837_driver_t* const drv) {
 	(void)drv;
 	/* All circuit blocks are powered down, except the 4-wire serial bus
diff --git a/firmware/common/max2837_target.h b/firmware/common/max2837_target.h
index 52d2565e..b834ea7c 100644
--- a/firmware/common/max2837_target.h
+++ b/firmware/common/max2837_target.h
@@ -24,8 +24,12 @@
 #define __MAX2837_TARGET_H
 
 #include "max2837.h"
+#include "spi.h"
 
 void max2837_target_init(max2837_driver_t* const drv);
+void max2837_target_spi_select(spi_t* const spi);
+void max2837_target_spi_unselect(spi_t* const spi);
+
 void max2837_mode_shutdown(max2837_driver_t* const drv);
 void max2837_mode_standby(max2837_driver_t* const drv);
 void max2837_mode_tx(max2837_driver_t* const drv);
diff --git a/firmware/common/max5864.c b/firmware/common/max5864.c
index 773b0d2a..c3cb456d 100644
--- a/firmware/common/max5864.c
+++ b/firmware/common/max5864.c
@@ -24,12 +24,14 @@
 #include "max5864.h"
 #include "max5864_target.h"
 
+#include "hackrf_core.h"
+
 static void max5864_write(max5864_driver_t* const drv, uint8_t value) {
 	spi_transfer(drv->spi, &value, 1);
 }
 
-void max5864_init(max5864_driver_t* const drv) {
-	spi_init(drv->spi);
+static void max5864_init(max5864_driver_t* const drv) {
+	spi_init(drv->spi, &ssp1_config_max5864);
 	max5864_target_init(drv);
 }
 
diff --git a/firmware/common/max5864_target.c b/firmware/common/max5864_target.c
index 0c61f6f2..d109f898 100644
--- a/firmware/common/max5864_target.c
+++ b/firmware/common/max5864_target.c
@@ -36,3 +36,13 @@ void max5864_target_init(max5864_driver_t* const drv) {
 	GPIO_SET(PORT_AD_CS) = PIN_AD_CS;
 	GPIO_DIR(PORT_AD_CS) |= PIN_AD_CS;
 }
+
+void max5864_target_spi_select(spi_t* const spi) {
+	(void)spi;
+	gpio_clear(PORT_AD_CS, PIN_AD_CS);
+}
+
+void max5864_target_spi_unselect(spi_t* const spi) {
+	(void)spi;
+	gpio_set(PORT_AD_CS, PIN_AD_CS);
+}
diff --git a/firmware/common/max5864_target.h b/firmware/common/max5864_target.h
index be684e2c..b5c7a060 100644
--- a/firmware/common/max5864_target.h
+++ b/firmware/common/max5864_target.h
@@ -23,7 +23,10 @@
 #define __MAX5864_TARGET_H__
 
 #include "max5864.h"
+#include "spi.h"
 
 void max5864_target_init(max5864_driver_t* const drv);
+void max5864_target_spi_select(spi_t* const spi);
+void max5864_target_spi_unselect(spi_t* const spi);
 
 #endif/*__MAX5864_TARGET_H__*/
diff --git a/firmware/common/rffc5071.c b/firmware/common/rffc5071.c
index e9c1b72c..54237b98 100644
--- a/firmware/common/rffc5071.c
+++ b/firmware/common/rffc5071.c
@@ -90,7 +90,7 @@ void rffc5071_setup(rffc5071_driver_t* const drv)
 {
 	rffc5071_init(drv);
 
-	spi_init(drv->spi);
+	spi_init(drv->spi, NULL);
 
 	/* initial setup */
 	/* put zeros in freq contol registers */
diff --git a/firmware/common/rffc5071_spi.c b/firmware/common/rffc5071_spi.c
index 1711c513..74574902 100644
--- a/firmware/common/rffc5071_spi.c
+++ b/firmware/common/rffc5071_spi.c
@@ -83,7 +83,8 @@ static void rffc5071_spi_target_init(spi_t* const spi) {
 	gpio_set(PORT_MIXER_RESETX, PIN_MIXER_RESETX); /* active low */
 }
 
-void rffc5071_spi_init(spi_t* const spi) {
+void rffc5071_spi_init(spi_t* const spi, const void* const config) {
+	(void)config;
 	rffc5071_spi_bus_init(spi);
 	rffc5071_spi_target_init(spi);
 }
diff --git a/firmware/common/rffc5071_spi.h b/firmware/common/rffc5071_spi.h
index d20fe152..ba2eb44f 100644
--- a/firmware/common/rffc5071_spi.h
+++ b/firmware/common/rffc5071_spi.h
@@ -25,7 +25,7 @@
 
 #include "spi.h"
 
-void rffc5071_spi_init(spi_t* const spi);
+void rffc5071_spi_init(spi_t* const spi, const void* const config);
 void rffc5071_spi_transfer(spi_t* const spi, void* const data, const size_t count);
 void rffc5071_spi_transfer_gather(spi_t* const spi, const spi_transfer_t* const transfer, const size_t count);
 
diff --git a/firmware/common/spi.c b/firmware/common/spi.c
index f743c0bc..99076737 100644
--- a/firmware/common/spi.c
+++ b/firmware/common/spi.c
@@ -21,8 +21,8 @@
 
 #include "spi.h"
 
-void spi_init(spi_t* const spi) {
-	spi->init(spi);
+void spi_init(spi_t* const spi, const void* const config) {
+	spi->init(spi, config);
 }
 
 void spi_transfer(spi_t* const spi, void* const data, const size_t count) {
diff --git a/firmware/common/spi.h b/firmware/common/spi.h
index cad5f268..d2ec2a46 100644
--- a/firmware/common/spi.h
+++ b/firmware/common/spi.h
@@ -33,12 +33,13 @@ struct spi_t;
 typedef struct spi_t spi_t;
 
 struct spi_t {
-	void (*init)(spi_t* const spi);
+	const void* config;
+	void (*init)(spi_t* const spi, const void* const config);
 	void (*transfer)(spi_t* const spi, void* const data, const size_t count);
 	void (*transfer_gather)(spi_t* const spi, const spi_transfer_t* const transfers, const size_t count);
 };
 
-void spi_init(spi_t* const spi);
+void spi_init(spi_t* const spi, const void* const config);
 void spi_transfer(spi_t* const spi, void* const data, const size_t count);
 void spi_transfer_gather(spi_t* const spi, const spi_transfer_t* const transfers, const size_t count);
 
diff --git a/firmware/common/max5864_spi.c b/firmware/common/spi_ssp1.c
similarity index 58%
rename from firmware/common/max5864_spi.c
rename to firmware/common/spi_ssp1.c
index c30750ba..b0e6182a 100644
--- a/firmware/common/max5864_spi.c
+++ b/firmware/common/spi_ssp1.c
@@ -19,60 +19,61 @@
  * Boston, MA 02110-1301, USA.
  */
 
-#include "max5864_spi.h"
+#include "spi_ssp1.h"
 
-#include <libopencm3/lpc43xx/gpio.h>
 #include <libopencm3/lpc43xx/scu.h>
 #include <libopencm3/lpc43xx/ssp.h>
 
 #include "hackrf_core.h"
 
-void max5864_spi_init(spi_t* const spi) {
-	(void)spi;
+void spi_ssp1_init(spi_t* const spi, const void* const _config) {
+	const ssp1_config_t* const config = _config;
 
-	/* FIXME speed up once everything is working reliably */
-	/*
-	// Freq About 0.0498MHz / 49.8KHz => Freq = PCLK / (CPSDVSR * [SCR+1]) with PCLK=PLL1=204MHz
-	const uint8_t serial_clock_rate = 32;
-	const uint8_t clock_prescale_rate = 128;
-	*/
-	// Freq About 4.857MHz => Freq = PCLK / (CPSDVSR * [SCR+1]) with PCLK=PLL1=204MHz
-	const uint8_t serial_clock_rate = 21;
-	const uint8_t clock_prescale_rate = 2;
-	
 	ssp_init(SSP1_NUM,
-		SSP_DATA_8BITS,
+		config->data_bits,
 		SSP_FRAME_SPI,
 		SSP_CPOL_0_CPHA_0,
-		serial_clock_rate,
-		clock_prescale_rate,
+		config->serial_clock_rate,
+		config->clock_prescale_rate,
 		SSP_MODE_NORMAL,
 		SSP_MASTER,
 		SSP_SLAVE_OUT_ENABLE);
 
+	spi->config = config;
+	
 	/* Configure SSP1 Peripheral (to be moved later in SSP driver) */
 	scu_pinmux(SCU_SSP1_MISO, (SCU_SSP_IO | SCU_CONF_FUNCTION5));
 	scu_pinmux(SCU_SSP1_MOSI, (SCU_SSP_IO | SCU_CONF_FUNCTION5));
 	scu_pinmux(SCU_SSP1_SCK,  (SCU_SSP_IO | SCU_CONF_FUNCTION1));
 }
 
-void max5864_spi_transfer_gather(spi_t* const spi, const spi_transfer_t* const transfers, const size_t count) {
-	(void)spi;
+void spi_ssp1_transfer_gather(spi_t* const spi, const spi_transfer_t* const transfers, const size_t count) {
+	const ssp1_config_t* const config = spi->config;
 
-	gpio_clear(PORT_AD_CS, PIN_AD_CS);
+	const size_t word_size = (SSP1_CR0 & 0xf) + 1;
+
+	config->select(spi);
 	for(size_t i=0; i<count; i++) {
 		const size_t data_count = transfers[i].count;
-		uint8_t* const data = transfers[i].data;
-		for(size_t j=0; j<data_count; j++) {
-			data[j] = ssp_transfer(SSP1_NUM, data[j]);
+
+		if( word_size > 8 ) {
+			uint16_t* const data = transfers[i].data;
+			for(size_t j=0; j<data_count; j++) {
+				data[j] = ssp_transfer(SSP1_NUM, data[j]);
+			}
+		} else {
+			uint8_t* const data = transfers[i].data;
+			for(size_t j=0; j<data_count; j++) {
+				data[j] = ssp_transfer(SSP1_NUM, data[j]);
+			}
 		}
-	}		
-	gpio_set(PORT_AD_CS, PIN_AD_CS);
+	}
+	config->unselect(spi);
 }
 
-void max5864_spi_transfer(spi_t* const spi, void* const data, const size_t count) {
+void spi_ssp1_transfer(spi_t* const spi, void* const data, const size_t count) {
 	const spi_transfer_t transfers[] = {
 		{ data, count },
 	};
-	max5864_spi_transfer_gather(spi, transfers, 1);
+	spi_ssp1_transfer_gather(spi, transfers, 1);
 }
diff --git a/firmware/common/max5864_spi.h b/firmware/common/spi_ssp1.h
similarity index 59%
rename from firmware/common/max5864_spi.h
rename to firmware/common/spi_ssp1.h
index 7ee4d651..b74aff40 100644
--- a/firmware/common/max5864_spi.h
+++ b/firmware/common/spi_ssp1.h
@@ -19,15 +19,26 @@
  * Boston, MA 02110-1301, USA.
  */
 
-#ifndef __MAX5864_SPI_H__
-#define __MAX5864_SPI_H__
+#ifndef __SPI_SSP1_H__
+#define __SPI_SSP1_H__
 
+#include <stdint.h>
 #include <stddef.h>
 
 #include "spi.h"
 
-void max5864_spi_init(spi_t* const spi);
-void max5864_spi_transfer(spi_t* const spi, void* const value, const size_t count);
-void max5864_spi_transfer_gather(spi_t* const spi, const spi_transfer_t* const transfers, const size_t count);
+#include <libopencm3/lpc43xx/ssp.h>
 
-#endif/*__MAX5864_SPI_H__*/
+typedef struct ssp1_config_t {
+	ssp_datasize_t data_bits;
+	uint8_t serial_clock_rate;
+	uint8_t clock_prescale_rate;
+	void (*select)(spi_t* const spi);
+	void (*unselect)(spi_t* const spi);
+} ssp1_config_t;
+
+void spi_ssp1_init(spi_t* const spi, const void* const config);
+void spi_ssp1_transfer(spi_t* const spi, void* const value, const size_t count);
+void spi_ssp1_transfer_gather(spi_t* const spi, const spi_transfer_t* const transfers, const size_t count);
+
+#endif/*__SPI_SSP1_H__*/
diff --git a/firmware/common/w25q80bv.c b/firmware/common/w25q80bv.c
index e7596c0b..6f33edae 100644
--- a/firmware/common/w25q80bv.c
+++ b/firmware/common/w25q80bv.c
@@ -58,7 +58,7 @@ void w25q80bv_setup(w25q80bv_driver_t* const drv)
 	drv->num_pages = 4096U;
 	drv->num_bytes = 1048576U;
 
-	spi_init(drv->spi);
+	spi_init(drv->spi, NULL);
 
 	device_id = 0;
 	while(device_id != W25Q80BV_DEVICE_ID_RES)
@@ -201,6 +201,7 @@ void w25q80bv_program(w25q80bv_driver_t* const drv, uint32_t addr, uint32_t len,
 }
 
 spi_t w25q80bv_spi = {
+	.config = NULL,
 	.init = w25q80bv_spi_init,
 	.transfer = w25q80bv_spi_transfer,
 	.transfer_gather = w25q80bv_spi_transfer_gather,
diff --git a/firmware/common/w25q80bv_spi.c b/firmware/common/w25q80bv_spi.c
index d64e69ba..f51b7b13 100644
--- a/firmware/common/w25q80bv_spi.c
+++ b/firmware/common/w25q80bv_spi.c
@@ -30,8 +30,9 @@
 
 #include "hackrf_core.h"
 
-void w25q80bv_spi_init(spi_t* const spi) {
+void w25q80bv_spi_init(spi_t* const spi, const void* const config) {
 	(void)spi;
+	(void)config;
 	
 	const uint8_t serial_clock_rate = 2;
 	const uint8_t clock_prescale_rate = 2;
diff --git a/firmware/common/w25q80bv_spi.h b/firmware/common/w25q80bv_spi.h
index c6c95026..dce1a029 100644
--- a/firmware/common/w25q80bv_spi.h
+++ b/firmware/common/w25q80bv_spi.h
@@ -28,7 +28,7 @@
 
 #include "spi.h"
 
-void w25q80bv_spi_init(spi_t* const spi);
+void w25q80bv_spi_init(spi_t* const spi, const void* const config);
 void w25q80bv_spi_transfer_gather(spi_t* const spi, const spi_transfer_t* const transfers, const size_t transfer_count);
 void w25q80bv_spi_transfer(spi_t* const spi, void* const data, const size_t count);
 
diff --git a/firmware/hackrf-common.cmake b/firmware/hackrf-common.cmake
index ff5bcba0..9d4d01ea 100644
--- a/firmware/hackrf-common.cmake
+++ b/firmware/hackrf-common.cmake
@@ -135,14 +135,13 @@ macro(DeclareTargets)
 		${PATH_HACKRF_FIRMWARE_COMMON}/rf_path.c
 		${PATH_HACKRF_FIRMWARE_COMMON}/si5351c.c
 		${PATH_HACKRF_FIRMWARE_COMMON}/max2837.c
-		${PATH_HACKRF_FIRMWARE_COMMON}/max2837_spi.c
 		${PATH_HACKRF_FIRMWARE_COMMON}/max2837_target.c
 		${PATH_HACKRF_FIRMWARE_COMMON}/max5864.c
-		${PATH_HACKRF_FIRMWARE_COMMON}/max5864_spi.c
 		${PATH_HACKRF_FIRMWARE_COMMON}/max5864_target.c
 		${PATH_HACKRF_FIRMWARE_COMMON}/rffc5071.c
 		${PATH_HACKRF_FIRMWARE_COMMON}/rffc5071_spi.c
 		${PATH_HACKRF_FIRMWARE_COMMON}/spi.c
+		${PATH_HACKRF_FIRMWARE_COMMON}/spi_ssp1.c
 		m0_bin.s
 	)