Sojus07/hackrf
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Document purpose and timing of existing M0 code.

Browse Source 
This commit does not modify the code; it only updates comments.
This commit is contained in:
Martin Ling
2021-12-20 10:55:22 +00:00
parent 4df805c85f
commit 3d9802260e
1 changed files with 147 additions and 48 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

195
firmware/hackrf_usb/sgpio_m0.s
View File

@ -1,9 +1,93 @@
/* /*
* This file is part of GreatFET * Copyright 2019-2022 Great Scott Gadgets
* *
* Specialized SGPIO interrupt handler for Rhododendron. * This file is part of HackRF.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, Inc., 51 Franklin Street,
* Boston, MA 02110-1301, USA.
*/ */
/*
Introduction
============
This file contains the code that runs on the Cortex-M0 core of the LPC43xx.
The M0 core is used to implement all the timing-critical usage of the SGPIO
peripheral, which interfaces to the MAX5864 ADC/DAC via the CPLD.
The M0 reads or writes 32 bytes at a time from the SGPIO registers,
transferring these bytes to or from a shared USB bulk buffer. The M4 core
handles transferring data between this buffer and the USB host.
The SGPIO peripheral is set up and enabled by the M4 core. All the M0 needs to
do is handle the SGPIO exchange interrupt, which indicates that new data can
now be read from or written to the SGPIO shadow registers.
Timing
======
This code has tight timing constraints.
We have to complete a read or write from SGPIO every 163 cycles.
The CPU clock is 204MHz. We exchange 32 bytes at a time in the SGPIO
registers, which is 16 samples worth of IQ data. At the maximum sample rate of
20MHz, the SGPIO update rate is 20 / 16 = 1.25MHz. So we have 204 / 1.25 =
163.2 cycles available.
Access to the SGPIO peripheral is slow, due to the asynchronous bridge that
connects it to the AHB bus matrix. Section 20.4.1 of the LPC43xx user manual
(UM10503) specifies the access latencies as:
Read: 4 x MCLK + 4 x CLK_PERIPH_SGPIO
Write: 4 x MCLK + 2 x CLK_PERIPH_SGPIO
In our case both these clocks are at 204MHz so reads add 8 cycles and writes
add 6. These are latencies that add to the usual M0 instruction timings, so an
ldr from SGPIO takes 10 cycles, and an str to SGPIO takes 8 cycles.
These latencies are assumed to apply to all accesses to the SGPIO peripheral's
address space, which includes its interrupt control registers as well as the
shadow registers.
There are two key code paths, with the following worst-case timings:
RX: 159 cycles
TX: 144 cycles
Design
======
Due to the timing constraints, this code is highly optimised.
This is the only code that runs on the M0, so it does not need to follow
calling conventions, nor use features of the architecture in standard ways.
The SGPIO handling does not run as an ISR. It polls the interrupt status.
This saves the cycle costs of interrupt entry and exit, and allows all
registers to be used freely.
All possible registers, including the stack pointer and link register, can be
used to store values needed in the code, to minimise memory loads and stores.
There are no function calls. There is no stack usage. All values are in
registers and fixed memory addresses.
*/
// Constants that point to registers we'll need to modify in the SGPIO block. // Constants that point to registers we'll need to modify in the SGPIO block.
.equ SGPIO_REGISTER_BLOCK_BASE, 0x40101000 .equ SGPIO_REGISTER_BLOCK_BASE, 0x40101000
@ -19,36 +103,53 @@
.equ TARGET_BUFFER_TX, 0x20007004 .equ TARGET_BUFFER_TX, 0x20007004
.equ TARGET_BUFFER_MASK, 0x7fff .equ TARGET_BUFFER_MASK, 0x7fff
// Entry point. At this point, the libopencm3 startup code has set things up as
// normal; .data and .bss are initialised, the stack is set up, etc. However,
// we don't actually use any of that. All the code in this file would work
// fine if the M0 jumped straight to main at reset.
.global main .global main
.thumb_func .thumb_func
main: main: // Cycle counts:
// The worst case timing is assumed to occur when reading the interrupt
// status register *just* misses the flag being set - so we include the
// cycles required to check it a second time.
//
// We also assume that we can spend a full 10 cycles doing an ldr from
// SGPIO the first time (2 for ldr, plus 8 for SGPIO-AHB bus latency),
// and still miss a flag that was set at the start of those 10 cycles.
//
// This latter asssumption is probably slightly pessimistic, since the
// sampling of the flag on the SGPIO side must occur some time after
// the ldr instruction begins executing on the M0. However, we avoid
// relying on any assumptions about the timing details of a read over
// the SGPIO to AHB bridge.
// Spin until we're ready to handle an SGPIO packet: // Spin until we're ready to handle an SGPIO packet:
// Grab the exchange interrupt staus... // Grab the exchange interrupt staus...
ldr r0, =SGPIO_EXCHANGE_INTERRUPT_STATUS_REG ldr r0, =SGPIO_EXCHANGE_INTERRUPT_STATUS_REG // 2, twice
ldr r0, [r0] ldr r0, [r0] // 10, twice
// ... check to see if it has any interrupt bits set... // ... check to see if it has any interrupt bits set...
lsr r0, #1 lsr r0, #1 // 1, twice
// ... and if not, jump back to the beginning. // ... and if not, jump back to the beginning.
bcc main bcc main // 3, then 1
// Clear the interrupt pending bits for the SGPIO slices we're working with. // Clear the interrupt pending bits for the SGPIO slices we're working with.
ldr r0, =SGPIO_EXCHANGE_INTERRUPT_CLEAR_REG ldr r0, =SGPIO_EXCHANGE_INTERRUPT_CLEAR_REG // 2
ldr r1, =0xffff ldr r1, =0xffff // 2
str r1, [r0] str r1, [r0] // 8
// Grab the base address of the SGPIO shadow registers... // Grab the base address of the SGPIO shadow registers...
ldr r7, =SGPIO_SHADOW_REGISTERS_BASE ldr r7, =SGPIO_SHADOW_REGISTERS_BASE // 2
// ... and grab the address of the buffer segment we want to write to / read from. // ... and grab the address of the buffer segment we want to write to / read from.
ldr r0, =TARGET_DATA_BUFFER // r0 = &buffer ldr r0, =TARGET_DATA_BUFFER // r0 = &buffer // 2
ldr r3, =TARGET_BUFFER_POSITION // r3 = &position_in_buffer ldr r3, =TARGET_BUFFER_POSITION // r3 = &position_in_buffer // 2
ldr r2, [r3] // r2 = position_in_buffer ldr r2, [r3] // r2 = position_in_buffer // 2
add r6, r0, r2 // r6 = buffer_target = &buffer + position_in_buffer add r6, r0, r2 // r6 = buffer_target = &buffer + position_in_buffer // 1
mov r8, r3 // Store &position_in_buffer. mov r8, r3 // Store &position_in_buffer. // 1
// Our slice chain is set up as follows (ascending data age; arrows are reversed for flow): // Our slice chain is set up as follows (ascending data age; arrows are reversed for flow):
// L -> F -> K -> C -> J -> E -> I -> A // L -> F -> K -> C -> J -> E -> I -> A
@ -56,53 +157,51 @@ main:
// 44 -> 20 -> 40 -> 8 -> 36 -> 16 -> 32 -> 0 // 44 -> 20 -> 40 -> 8 -> 36 -> 16 -> 32 -> 0
// Load direction (TX or RX) // Load direction (TX or RX)
ldr r0, =TARGET_BUFFER_TX ldr r0, =TARGET_BUFFER_TX // 2
ldr r0, [r0] ldr r0, [r0] // 2
// TX? // TX?
lsr r0, #1 lsr r0, #1 // 1
bcc direction_rx bcc direction_rx // 1 thru, 3 taken
direction_tx: direction_tx:
ldm r6!, {r0-r5} ldm r6!, {r0-r5} // 7
str r0, [r7, #44] str r0, [r7, #44] // 8
str r1, [r7, #20] str r1, [r7, #20] // 8
str r2, [r7, #40] str r2, [r7, #40] // 8
str r3, [r7, #8 ] str r3, [r7, #8 ] // 8
str r4, [r7, #36] str r4, [r7, #36] // 8
str r5, [r7, #16] str r5, [r7, #16] // 8
ldm r6!, {r0-r1} ldm r6!, {r0-r1} // 3
str r0, [r7, #32] str r0, [r7, #32] // 8
str r1, [r7, #0] str r1, [r7, #0] // 8
b done b done // 3
direction_rx: direction_rx:
// 8 cycles ldr r0, [r7, #44] // 10
ldr r0, [r7, #44] // 2 ldr r1, [r7, #20] // 10
ldr r1, [r7, #20] // 2 ldr r2, [r7, #40] // 10
ldr r2, [r7, #40] // 2 ldr r3, [r7, #8 ] // 10
ldr r3, [r7, #8 ] // 2 ldr r4, [r7, #36] // 10
ldr r4, [r7, #36] // 2 ldr r5, [r7, #16] // 10
ldr r5, [r7, #16] // 2 stm r6!, {r0-r5} // 7
stm r6!, {r0-r5} // 7
// 6 cycles ldr r0, [r7, #32] // 10
ldr r0, [r7, #32] // 2 ldr r1, [r7, #0] // 10
ldr r1, [r7, #0] // 2 stm r6!, {r0-r1} // 3
stm r6!, {r0-r1}
done: done:
// Finally, update the buffer location... // Finally, update the buffer location...
ldr r0, =TARGET_BUFFER_MASK ldr r0, =TARGET_BUFFER_MASK // 2
and r0, r6, r0 // r0 = (position_in_buffer + size_copied) % buffer_size and r0, r6, r0 // r0 = (pos_in_buffer + size_copied) % buffer_size // 1
// ... restore &position_in_buffer, and store the new position there... // ... restore &position_in_buffer, and store the new position there...
mov r1, r8 mov r1, r8 // 1
str r0, [r1] // position_in_buffer = (position_in_buffer + size_copied) % buffer_size str r0, [r1] // pos_in_buffer = (pos_in_buffer + size_copied) % buffer_size // 2
b main b main // 3