Sojus07/hackrf
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Lot of comments added.

Browse Source
This commit is contained in:
TitanMKD
2013-04-04 19:19:59 +02:00
parent 3eb757c7d8
commit 118953b451
1 changed files with 57 additions and 40 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

97
firmware/common/sgpio.c
View File

@ -1,5 +1,6 @@
/*
* Copyright 2012 Jared Boone <jared@sharebrained.com>
* Copyright 2013 Benjamin Vernouxe <titanmkd@gmail.com>
*
* This file is part of HackRF.
*
@ -89,6 +90,19 @@ void sgpio_test_interface() {
}
}
/*
SGPIO0 to 7 = DAC/ADC data bits 0 to 7 (Nota: DAC is 10bits but only bit9 to bit2 are used bit1 & 0 are forced to 0 by CPLD)
ADC=> CLK x 2=CLKx2 with CLKx2(0)rising=D0Q, CLKx2(1)rising=D1I (corresponds to CLK(0)falling+tD0Q=>D0Q, CLK(1)rising+tDOI=>D1I, CLK(1)falling+tD0Q=>D1Q, CLK(1)rising+tDOI=>D2I ...)
tDOI(CLK Rise to I-ADC Channel-I Output Data Valid)=7.4 to 9ns, tD0Q(CLK Fall to Q-ADC Channel-Q Output Data Valid)=6.9 to 9ns
DAC=> CLK x 2=CLKx2 with CLKx2(0)rising=Q:N-2, CLKx2(1)rising=I:N-1(corresponds to CLK(0)rising=>Q:N-2, CLK(0)falling I:N-1, CLK(1)rising=>Q:N-1, CLK(1)falling I:N ...)
tDSI(I-DAC Data to CLK Fall Setup Time)=min 10ns, tDSQ(Q-DAC Data to CLK Rise Setup Time)=min 10ns
SGPIO8 Clock Input (External Clock)
SGPIO9 Capture Input (Capture/ChipSelect, 1=Enable Capture, 0=Disable capture)
SGPIO10 Disable Output (1/High=Disable codec data stream, 0/Low=Enable codec data stream)
SGPIO11 Direction Output (1/High=TX mode LPC43xx=>CPLD=>DAC, 0/Low=RX mode LPC43xx<=CPLD<=ADC)
*/
void sgpio_configure(
const transceiver_mode_t transceiver_mode,
const bool multi_slice
@ -102,8 +116,8 @@ void sgpio_configure(
const uint_fast8_t cpld_direction =
(transceiver_mode == TRANSCEIVER_MODE_TX) ? 1 : 0;
SGPIO_GPIO_OUTREG =
(cpld_direction << 11)
| (1L << 10) // disable
(cpld_direction << 11) /* 1=Output SGPIO11 High(TX mode), 0=Output SGPIO11 Low(RX mode)*/
| (1L << 10) // disable codec data stream during configuration (Output SGPIO10 High)
;
// Enable SGPIO pin outputs.
@ -112,37 +126,38 @@ void sgpio_configure(
? (0xFF << 0)
: (0x00 << 0);
SGPIO_GPIO_OENREG =
(1L << 11) // direction
| (1L << 10) // disable
| (0L << 9) // capture
| (0L << 8) // clock
| sgpio_gpio_data_direction
(1L << 11) // direction output SGPIO11 active
| (1L << 10) // disable output SGPIO10 active
| (0L << 9) // capture input SGPIO9 (output i is tri-stated)
| (0L << 8) // clock input SGPIO8 (output i is tri-stated)
| sgpio_gpio_data_direction // 0xFF=Output all SGPIO High(TX mode), 0x00=Output all SPGIO Low(RX mode)
;
SGPIO_OUT_MUX_CFG( 8) = // SGPIO: Input: clock
SGPIO_OUT_MUX_CFG_P_OE_CFG(0)
| SGPIO_OUT_MUX_CFG_P_OUT_CFG(0)
SGPIO_OUT_MUX_CFG( 8) = // SGPIO8: Input: clock
SGPIO_OUT_MUX_CFG_P_OE_CFG(0) /* 0x0 gpio_oe (state set by GPIO_OEREG) */
| SGPIO_OUT_MUX_CFG_P_OUT_CFG(0) /* 0x0 dout_doutm1 (1-bit mode) */
;
SGPIO_OUT_MUX_CFG( 9) = // SGPIO: Input: qualifier
SGPIO_OUT_MUX_CFG_P_OE_CFG(0)
| SGPIO_OUT_MUX_CFG_P_OUT_CFG(0)
SGPIO_OUT_MUX_CFG( 9) = // SGPIO9: Input: qualifier
SGPIO_OUT_MUX_CFG_P_OE_CFG(0) /* 0x0 gpio_oe (state set by GPIO_OEREG) */
| SGPIO_OUT_MUX_CFG_P_OUT_CFG(0) /* 0x0 dout_doutm1 (1-bit mode) */
;
SGPIO_OUT_MUX_CFG(10) = // GPIO: Output: disable
SGPIO_OUT_MUX_CFG_P_OE_CFG(0)
| SGPIO_OUT_MUX_CFG_P_OUT_CFG(4)
SGPIO_OUT_MUX_CFG(10) = // GPIO10: Output: disable
SGPIO_OUT_MUX_CFG_P_OE_CFG(0) /* 0x0 gpio_oe (state set by GPIO_OEREG) */
| SGPIO_OUT_MUX_CFG_P_OUT_CFG(4) /* 0x4=gpio_out (level set by GPIO_OUTREG) */
;
SGPIO_OUT_MUX_CFG(11) = // GPIO: Output: direction
SGPIO_OUT_MUX_CFG_P_OE_CFG(0)
| SGPIO_OUT_MUX_CFG_P_OUT_CFG(4)
SGPIO_OUT_MUX_CFG(11) = // GPIO11: Output: direction
SGPIO_OUT_MUX_CFG_P_OE_CFG(0) /* 0x0 gpio_oe (state set by GPIO_OEREG) */
| SGPIO_OUT_MUX_CFG_P_OUT_CFG(4) /* 0x4=gpio_out (level set by GPIO_OUTREG) */
;
const uint_fast8_t output_multiplexing_mode =
multi_slice ? 11 : 9;
/* SGPIO0 to SGPIO7 */
for(uint_fast8_t i=0; i<8; i++) {
// SGPIO pin 0 outputs slice A bit "i".
SGPIO_OUT_MUX_CFG(i) =
SGPIO_OUT_MUX_CFG_P_OE_CFG(0)
| SGPIO_OUT_MUX_CFG_P_OUT_CFG(output_multiplexing_mode)
| SGPIO_OUT_MUX_CFG_P_OUT_CFG(output_multiplexing_mode) /* 11/0xB=dout_doutm8c (8-bit mode 8c)(multislice L0/7, N0/7), 9=dout_doutm8a (8-bit mode 8a)(A0/7,B0/7) */
;
}
@ -162,32 +177,34 @@ void sgpio_configure(
const uint_fast8_t slice_count = multi_slice ? 8 : 1;
uint32_t slice_enable_mask = 0;
for(uint_fast8_t i=0; i<slice_count; i++) {
/* Configure Slice A, I, E, J, C, K, F, L (multi_slice mode) */
for(uint_fast8_t i=0; i<slice_count; i++)
{
const uint_fast8_t slice_index = slice_indices[i];
const bool input_slice = (i == 0) && (transceiver_mode == TRANSCEIVER_MODE_RX);
const uint_fast8_t concat_order = (input_slice || single_slice) ? 0 : 3;
const uint_fast8_t concat_enable = (input_slice || single_slice) ? 0 : 1;
const bool input_slice = (i == 0) && (transceiver_mode == TRANSCEIVER_MODE_RX); /* Only for slice0/A and RX mode set input_slice to 1 */
const uint_fast8_t concat_order = (input_slice || single_slice) ? 0 : 3; /* 0x0=Self-loop(slice0/A RX mode), 0x3=8 slices */
const uint_fast8_t concat_enable = (input_slice || single_slice) ? 0 : 1; /* 0x0=External data pin(slice0/A RX mode), 0x1=Concatenate data */
const uint_fast8_t clk_capture_mode = (transceiver_mode == TRANSCEIVER_MODE_RX) ? 1 : 0;
SGPIO_MUX_CFG(slice_index) =
SGPIO_MUX_CFG_CONCAT_ORDER(concat_order)
| SGPIO_MUX_CFG_CONCAT_ENABLE(concat_enable)
| SGPIO_MUX_CFG_QUALIFIER_SLICE_MODE(0)
| SGPIO_MUX_CFG_QUALIFIER_PIN_MODE(1)
| SGPIO_MUX_CFG_QUALIFIER_MODE(3)
| SGPIO_MUX_CFG_CLK_SOURCE_SLICE_MODE(0)
| SGPIO_MUX_CFG_CLK_SOURCE_PIN_MODE(0)
| SGPIO_MUX_CFG_EXT_CLK_ENABLE(1)
| SGPIO_MUX_CFG_QUALIFIER_SLICE_MODE(0) /* Select qualifier slice A(0x0) */
| SGPIO_MUX_CFG_QUALIFIER_PIN_MODE(1) /* Select qualifier pin SGPIO9(0x1) */
| SGPIO_MUX_CFG_QUALIFIER_MODE(3) /* External SGPIO */
| SGPIO_MUX_CFG_CLK_SOURCE_SLICE_MODE(0) /* Select clock source slice D(0x0) */
| SGPIO_MUX_CFG_CLK_SOURCE_PIN_MODE(0) /* Source Clock Pin 0x0 = SGPIO8 */
| SGPIO_MUX_CFG_EXT_CLK_ENABLE(1) /* External clock signal(pin) selected */
;
SGPIO_SLICE_MUX_CFG(slice_index) =
SGPIO_SLICE_MUX_CFG_INV_QUALIFIER(0)
| SGPIO_SLICE_MUX_CFG_PARALLEL_MODE(3)
| SGPIO_SLICE_MUX_CFG_DATA_CAPTURE_MODE(0)
| SGPIO_SLICE_MUX_CFG_INV_OUT_CLK(0)
| SGPIO_SLICE_MUX_CFG_CLKGEN_MODE(1)
| SGPIO_SLICE_MUX_CFG_CLK_CAPTURE_MODE(clk_capture_mode)
| SGPIO_SLICE_MUX_CFG_MATCH_MODE(0)
SGPIO_SLICE_MUX_CFG_INV_QUALIFIER(0) /* 0x0=Use normal qualifier. */
| SGPIO_SLICE_MUX_CFG_PARALLEL_MODE(3) /* 0x3=Shift 1 byte(8bits) per clock. */
| SGPIO_SLICE_MUX_CFG_DATA_CAPTURE_MODE(0) /* 0x0=Detect rising edge. (Condition for input bit match interrupt) */
| SGPIO_SLICE_MUX_CFG_INV_OUT_CLK(0) /* 0x0=Normal clock. */
| SGPIO_SLICE_MUX_CFG_CLKGEN_MODE(1) /* 0x1=Use external clock from a pin or other slice */
| SGPIO_SLICE_MUX_CFG_CLK_CAPTURE_MODE(clk_capture_mode) /* 0x0=Use rising clock edge, 0x1=Use falling clock edge */
| SGPIO_SLICE_MUX_CFG_MATCH_MODE(0) /* 0x0=Do not match data */
;
SGPIO_PRESET(slice_index) = 0; // External clock, don't care
@ -208,14 +225,14 @@ void sgpio_configure(
void sgpio_cpld_stream_enable() {
// Enable codec data stream.
SGPIO_GPIO_OUTREG &= ~(1L << 10);
SGPIO_GPIO_OUTREG &= ~(1L << 10); /* SGPIO10 */
}
void sgpio_cpld_stream_disable() {
// Disable codec data stream.
SGPIO_GPIO_OUTREG |= (1L << 10);
SGPIO_GPIO_OUTREG |= (1L << 10); /* SGPIO10 */
}
bool sgpio_cpld_stream_is_enabled() {
return (SGPIO_GPIO_OUTREG & (1L << 10)) == 0;
return (SGPIO_GPIO_OUTREG & (1L << 10)) == 0; /* SGPIO10 */
}