fix(dfu): Use original HackRF DFU tools

firmware/README

@@ -27,10 +27,12 @@ To build and install a standard firmware image for HackRF One:
 $ cd hackrf_usb
 $ mkdir build
 $ cd build
-$ cmake .. -DBOARD=RAD1O
+$ cmake .. -DBOARD=HACKRF_ONE
 $ make
 $ hackrf_spiflash -w hackrf_usb.bin
 
+If you have a Jawbreaker, use -DBOARD=JAWBREAKER instead.
+If you have a rad1o, use -DBOARD=RAD1O instead.
 
 For loading firmware into RAM with DFU you will also need:
 
@@ -43,4 +45,4 @@ after the 3V3 LED illuminates.
 A .dfu file is built by default when building firmware.  Alternatively you can
 load a known good .dfu file from a release package with:
 
-$ dfu-util --device 1fc9:000c --alt 0 --download hackrf_usb_ram.dfu
+$ dfu-util --device 1fc9:000c --alt 0 --download hackrf_usb.dfu

firmware/hackrf-common.cmake

@@ -196,9 +196,14 @@ macro(DeclareTargets)
 	)
 
 	add_custom_target(
-		${PROJECT_NAME}.dfu ALL
+		${PROJECT_NAME}.dfu ${DFU_ALL}
-		DEPENDS ${PROJECT_NAME}.bin
+		DEPENDS ${PROJECT_NAME}_dfu.bin
-		COMMAND ${CMAKE_CURRENT_SOURCE_DIR}/../tools/make-dfu.py ${PROJECT_NAME}.bin ${PROJECT_NAME}.dfu
+		COMMAND rm -f _tmp.dfu _header.bin
+		COMMAND cp ${PROJECT_NAME}_dfu.bin _tmp.dfu
+		COMMAND ${DFU_COMMAND}
+		COMMAND python ../../dfu.py ${PROJECT_NAME}
+		COMMAND cat _header.bin _tmp.dfu >${PROJECT_NAME}.dfu
+		COMMAND rm -f _tmp.dfu _header.bin
 	)
 
 	add_custom_target(

firmware/tools/make-dfu.py

@@ -1,70 +0,0 @@
-#!/usr/bin/env python2
-# vim: set ts=4 sw=4 tw=0 et pm=:
-import struct
-import sys
-import os.path
-import getopt
-import zlib
-
-options, remainder = getopt.getopt(sys.argv[1:], 'p:v:d:S:v', ['pid=',
-														'vid=',
-														'did=',
-														'spec=',
-														'verbose',
-														])
-
-pid = 0x000c
-vid = 0x1fc9
-did = 0
-spec = 0x0100
-verbose = False
-
-for opt, arg in options:
-	if opt in ('-p', '--pid'):
-		pid = int(arg)
-	if opt in ('-v', '--vid'):
-		vid = int(arg)
-	if opt in ('-d', '--did'):
-		did = int(arg)
-	if opt in ('-S', '--spec'):
-		spec = int(arg)
-	elif opt in ('-v', '--verbose'):
-		verbose = True
-
-if len(remainder)<1:
-	in_file = "/dev/stdin"
-else:
-	in_file = remainder[0]
-
-if len(remainder)<2:
-	out = open("/dev/stdout","wb")
-else:
-	out = open(remainder[1],"wb")
-
-# ref. NXP UM10503 Table 24 (Boot image header description)
-header = ""
-header += struct.pack ('<B',int("11"+"011010",2)) # AES enc not active + No hash active
-header += struct.pack ('<B',int("11"+"111111",2)) # RESERVED + AES_CONTROL
-size=os.path.getsize(in_file)
-size=(size+511)/512 # 512 byte blocks, rounded up
-header += struct.pack('<H',size)                  # (badly named) HASH_SIZE
-header += struct.pack('8B',*[0xff] *8)            # HASH_VALUE (unused)
-header += struct.pack('4B',*[0xff] *4)            # RESERVED
-
-out.write( header )
-
-infile=open(in_file,"rb").read()
-out.write( infile )
-
-suffix= ""
-suffix+= struct.pack('<H', did)  # bcdDevice
-suffix+= struct.pack('<H', pid)  # idProduct
-suffix+= struct.pack('<H', vid)  # idVendor
-suffix+= struct.pack('<H', spec) # bcdDFU
-suffix+= b'DFU'[::-1]            # (reverse DFU)
-suffix+= struct.pack('<B', 16)   # suffix length
-
-out.write( suffix )
-
-checksum=zlib.crc32(header+infile+suffix) & 0xffffffff ^ 0xffffffff
-out.write( struct.pack('I', checksum) ) # crc32